Toxic Babe

This tutorial was written by and copyrighted to Seven on 24th April 2010.



For this tutorial you will need:

- PTU-kit Toxic from Sky Scraps which you can purchase here
- tubes of your choice (I used poser tubes which I made by myself. You can purchase these tubes here or here)
- font of your choice (I used Ahoy Distressed Mother1)


Let's start:

- Open a new canvas 600 x 550 px

- Copy and paste E8 and resize it.

- With your magic wand click inside the 3 circles and expand the selection about 5px.

- Copy and paste a paper of your choice and move this layer under the "frame layer"
Selection invert and press delete button.
Selection none.

- Highlight the frame.
With your magic wand click inside one of the circle and expand the selection about 5 px.
Highlight your paper layer.
Copy and paste a tube of your choice, resize it and arrange the face into the circle.
Selection invert and press delete.
Selection none.
Reduce the opacity to 70 % and change the mix mode to luminance (legacy)

- Repeat the above mentioned step with the other two circles.

- Highlight your frame layer and droshadow it.
Merge them visible.

- Copy and paste MetalE3, resize and dropshadow it.
Move it under your frame layer.

- Highlight your frame layer again.

- Copy and paste E7 (or an other ton), resize and dropshadow it.
Move it to the left side.

- Copy and paste your tube, resize and dropshadow it.
Position it in the middle of your tag.

- Copy and paste smock3, resiz it and move it to the ground.

- Copy and paste E27, resize and dropshadow it.
Arrange it to the left.

- Copy and paste frame1, resize and dropshadow it.
Move it over your frame to the right.

- Copy and paste the black widow, resize and dropshadow it.
Move it to the right a bit over your frame.

- Copy and paste Heart5, resize and dropshadow it.
Move it to the left.
It should looks like if it would be hanging on the mesh.

- Choose a machin colour and your font and write your name or text.
Dropshadow it.

- At least add copyright and watermark infos and save as.

Natures Gift

This tutorial was written by and copyrighted to Seven on 06th April 2010.



For this tutorial you will need:

- PTU-kit Naturel from Sky Scraps which you can purchase here
- tube of your choice (I used the fantastic artwork of Igolochka)
- a nature picture of your choice (I got mine at stock.xchng)
- font of your choice (I used FleurDeLeah)


Let's start:

- Ope a new canvas 550 x 550 px.

- Copy and paste Frame9 and resize it if needed.

- With your magic wand click inside of the frame end expand the selection about 3px.

- Copy and paste a paper of your choice and move it under the frame layer.
Selection invert and press delete button.

- Copy and paste your picture and arrange it in your frame.
Press delete again.
Selection none.

- Reduce the opacity of your picture to 25-35 %.

- Dropshadow your frame.

- Copy and paste your tube and arrange it in your frame.
Erase parts of the body which are lookig throught the border below.
Dropshadow it.

- Copy and paste Element6, resize and dropshadow it.
Move this layer under your frame and paper layers and arrange it a bit to the bottom.

- Copy and paste Mesh3, resize and dropshadow it.
Arrage it under your frame a bit to the top.

- Highlight your frame layer.

- Copy and paste Mesh2, mirror it vertical and resize it.
Arrange it to the right of your frame.
Add a dropshadow.

- Copy and paste Feuillage1.
Resize and dropshadow it and arrange it also to the right over your mesh.

- Copy and paste Butterfly3, resize and dropshadow it.
Arrange it to the top on the left side.

- Copy and paste Feuillage3, resize and dropshadow it.
Move it to the edge of your frame on the left.

- Copy and paste Flower1 and resize it.
Arrange it over your feuillage and add a dropshadow.

- Choose two matching colors and your font and write your name.
Add a small dropshadow and merge all visible.

- At least add your watermark/copyright and save as.

Ready!

Industrial Fae

This tutorial was written by and copyrighted to Seven on 31th March 2010.



For this tutorial you will need:

- PTU-kit Toxic from Sky Scraps which you can purchase here
- tube of your choice (I used the fantastic artwork of Joseph Corsentino which you can purchase at MPT)
- font of your choice (I used Hawaii_Killer)


Let's start:

- Open a new canvas 550 x 550 px.

- Copy and paste a round frame of your choice (Frame5).
Resize it if needed.

- With your magic wand click inside of the frame.

- Copy and paste a paper of your choice and move this layer under the frame layer.
Invert the selection and press delete button.
Invert the selection again.

- Add a new raster-layer

- Copy a broken glass layer (glass2) and paste it into the selection.
Selection none.

- Add a dropshadow to your glass and frame layer.

- Copy and paste your tube.
Resize it if needed and dropshadow it.
Arrange it in your frame and erase parts of the body/legs which are looking through the border of your frame.
(see my tag above for help)

- You can merge these layers visible.

- Copy and paste E10, resize it and move this layer und your frame layers.
Arrange it a bit to the bottom.

- Copy and paste E26, resize and dropshadow it.
Arrange it to the left a little bit to the top.
Some parts should be covered under the frame layer.

- Copy and paste MetalE6, resize and dropshadow it.
Arrange it in the middle.
Parts of it should be in the right top corner and in the left lower corner.

- Highlight your frame layer.

- Copy and paste a sign (E14), resize and dropshadow it.
Arrange it to the right top corner over your chain.

- Copy and paste Skull 6.
Resize and dropshadow it.
Arrange it under your sign.

- Copy and paste the spider (blackWidow) and arrange it to the right.
Dropshadow and resize it.

- Choose two matching colours and your font and write your name or text.
Add a small dropshadow.

- At least add watermark/copyirght infos and save as.

Yeaaah! It's done!