~~ Seven's Tutorials ~~

Every Girl wants to be a Princess

2010-09-24T06:32:00.000-07:00

This tutorial was written by and copyrighted to Seven on 24th September 2010.

Some ppl asked me if there's a tut for my little tag but it wasn't until today! ;)

For this tutorial you will need:

- Chassity's PTU-kit My Doll kit
- 2 fonts of your choice (I used Kaileen and violation)

Let's begin:

- Open a new canvas 500 x 400 px ( you can crop it later).

- Choose white as your foreground colour and none as background colour.

- With your rectangle (stroke 5 or 6) draw out a rectangle in the middle of your canvas.
Change this layer into a raster lay.

- Use your magic wand and click inside of the rectangel.
Expand the selection about 3.

- Copy and paste a paper of your choice.

- Invert the selection and press delete button on your keyboard.
Selection none.

- Move this layer under your frame layer.

- Highlight your frame layer and add a small matching dropshadow.

- Highlight your paper layer

- Copy and paste the castle, sun and cloud over your paper layer and arrange them
(you will have to resize and maybe rotate them)
Dropshadow them slightly.

- Copy and paste the beads (element43), resize and dropshadow them.
Move this layer under the paper layer.

- Arrange your beads to the right lower edge.

- Duplicate this layer

- Mirror vertical
Mirror horizontal.

- Highlight your frame layer

- Copy and paste the beadstring (element44), resize and dropshadow it.
Arrange it to the right upper boarder of the frame.

- Duplicate this layer.

- Mirror vertical
Mirror horizontal

- Copy and paste one of the fairy princesses (element1 or element2), resize and dropshadow it.
Move it over your tag a little bit to the right side.

- Choose black as your background colour and your first font (Kaileen)
Add your text.
Change vector to raster layer and dropshadow it slightly.

- Highlight your paper layer.

- Choose white as your background colour and your second font (violation)
Type your name and change it to a raster layer.
Dropshadow it.

- Rotate this layer abot 90 degrees and arrange it in your tag.

- Resize/crop and add watermark/copyright sign and save as.

Ready!

I hope you understand everything, It's a long time ago when I wrote a tutorial! *loool*

2 Hot 4 U

2010-08-02T04:13:00.001-07:00

This tutorial was written by and copyrighted to Seven on 02nd August 2010.

This is a really quick and easy tag :D

For this tutorial you will need:

- Tammy's part of Biker Babe Collab (purchaseable at PMTWS)
- font of your choice ( I used LDJ JillyNilly)

Let's begin:

- Open journalpiece and duplicate it with Shift+D
Enlarge the canvas about 450 x 300 px

- Copy and paste wordart1 and resize it.
Arrange it over the tag to the bottom

- Copy and paste one of the skulls with wings (skull-pinkgem) and resize it.
Move it to the left over the screw of your tag.

- Highlight your tag-layer and copy and paste one of the hearts with banner (heartbanner-blkplain).
Resize it and move it to the right, a little bit under the wordart.

- Choose a matching background colour and your font and write "2 Hot 4 U" or a text of your choice over the banner.
Convert to raster layer

- Highlight your tag again.

- Write your name on it and add a picture noise effect of your choice.
Convert to raster layer.

- Select all - free - not free and espand the selection about 2.
Add a new raster layer and fill it with white.
Move this layer under your name.
Selection none.
Add a small dropshadow.

- Merge all layer visible and save as.

HURRAY!

2010-08-02T02:45:00.001-07:00

I'm back back back back back back back back! *dance*

And I'm happy!

I've got the world best Mum and world best Uncle!
They rescued my PC and most of my datas!
Woohoooo! I just lost things which were on my C harddrive :D
And this wasn't that much! :S

Whoooot Whoooot!

That's great :D

At the moment I'm installing and installing! :S

Thank you all for you help offers and lovely mails!
You're great!

Seven

ATTN - I lost everything

2010-07-26T09:43:00.000-07:00

My Dears,

I don't know when I will be back.
My PC got a Trojan on my harddrive and it toally crashed my PC.
We wasn't able to repair or rescue any of my datas.
I'm so sad.
I lost hundreds of personal/private photos, datas, 10 GB CU Items, 10 GB PTU-Toobs, Things to create Poser Toobs and many many other stuff. I have lost more than 100 GB.
I don't have any toob to play with and I don't have one CU Item to create a new kit.
I lost all my selfmade stationaries.
Everything.
I am so sad about it, because it was one of my biggest hobbies.
Photography and Graphic.
At the moment I am not able to repurchase anything etc. because I'm still going to school and therefore I don't have enough money for it.

I just wanted to let you know that I don't know when I will be back in creating or when I'm back online because we don't know when my PC will be okay again.

I really miss to create and to talk to all of you guys.

Hugs and Kisses
Seven

P.S.: You can reach me at sarahgeisler1987 at gmail.com

Don't feed

2010-06-22T05:17:00.000-07:00

This tutorial was written by and copyrighted to Seven on 22th June 2010.

Some monthes a go I saw a taggie which looks nearly the same and I fell in love with it. *lol*
I asked the owner of it if there's a tut and she said no.
So I decided (and asked) if it's okay to made a tag (tut) which looks a bit like this but mostly with some of my ideas in it and I got the o.k. :)
Thank you so much Kathy!!! ♥

For this tutorial you will need:

- 2 small animal tubes (the ones I used are from the beautiful "Zoo Day" kit from Kristin Aagard)
- 2 fonts of your choice, a bigger one and a handwritten one (I used ToonRegular and DJBDiane)
- Mask of choice (I used WSL_Mask218 which you can get here)
- a pattern of your choice

Let's begin:

- Open a new canvas 500 x 350 px (if your name is longer you maybe have to use a larger width).

- Choose a darker colour for your foreground and a lighter colour for your background.

- Add a new raster layer and fill it with your lighter colour.
Apply your mask.

- Choose your text tool and your bigger font.
Font size 100 and stroke size 2.
Write your name and change the vector layer into a raster lay.

- Selection - All - Free and expand the selection about 3.

- Add a new raster layer and fill it with white.

- Selection none.

- Move the white layer under your name layer and add a dropshadow.

- Merge these 2 layers visible.

- Highlight your name and click with your magic wand inside of every letter which are in your lighter color.

- Add a new raster layer and fill it with your pattern.
Change it to soft light and reduce the opacity to 25

- Selection none.

- Merge these two layers visible.

- Copy and paste your tubes, resize them and arrange them on your tag.
Add a small dropshadow to them.

- Use your text tool again.
Change your background to your darker colour (no foreground colour).
Font size 20.

- Write your first part of the text and arrange it over your name.
Add a dropshadow.

- After this write your second part of the text and arrange it under your name.
Dropshadow it.

- Merge all visible.

- At least just add copyright info and/or watermark and save as.

Ready! ♥

Toxic Babe

2010-05-24T12:00:00.000-07:00

This tutorial was written by and copyrighted to Seven on 24th April 2010.

For this tutorial you will need:

- PTU-kit Toxic from Sky Scraps which you can purchase here
- tubes of your choice (I used poser tubes which I made by myself. You can purchase these tubes here or here)
- font of your choice (I used Ahoy Distressed Mother1)

Let's start:

- Open a new canvas 600 x 550 px

- Copy and paste E8 and resize it.

- With your magic wand click inside the 3 circles and expand the selection about 5px.

- Copy and paste a paper of your choice and move this layer under the "frame layer"
Selection invert and press delete button.
Selection none.

- Highlight the frame.
With your magic wand click inside one of the circle and expand the selection about 5 px.
Highlight your paper layer.
Copy and paste a tube of your choice, resize it and arrange the face into the circle.
Selection invert and press delete.
Selection none.
Reduce the opacity to 70 % and change the mix mode to luminance (legacy)

- Repeat the above mentioned step with the other two circles.

- Highlight your frame layer and droshadow it.
Merge them visible.

- Copy and paste MetalE3, resize and dropshadow it.
Move it under your frame layer.

- Highlight your frame layer again.

- Copy and paste E7 (or an other ton), resize and dropshadow it.
Move it to the left side.

- Copy and paste your tube, resize and dropshadow it.
Position it in the middle of your tag.

- Copy and paste smock3, resiz it and move it to the ground.

- Copy and paste E27, resize and dropshadow it.
Arrange it to the left.

- Copy and paste frame1, resize and dropshadow it.
Move it over your frame to the right.

- Copy and paste the black widow, resize and dropshadow it.
Move it to the right a bit over your frame.

- Copy and paste Heart5, resize and dropshadow it.
Move it to the left.
It should looks like if it would be hanging on the mesh.

- Choose a machin colour and your font and write your name or text.
Dropshadow it.

- At least add copyright and watermark infos and save as.

A Note

2010-04-24T05:57:00.001-07:00

Just a short note to let you all know that I left all my CT Teams.
At the moment I don't have enough time.
But don't worry I will keep on writing tutorials :)
There a millions of freebies and I've got a huge HD with a lot of stuff to play with!

Hugs
Seven

Get The Funk Back

2010-04-07T05:30:00.000-07:00

This tutorial was written by and copyrighted to Seven on 07th April 2010

For this tutorial you will need:

- Chassity's FTU-kit The 80ies Goodie Train which you can download here
- 3 tubes of your choice (I used a cool tube of Ismael Rac which you can purchase at AMI)
- Cora's Funk Template which you can download from her blog here (It's in the second download)
- font of your choice (I used Inspiration)

Let's start:

- Open your template and duplicate it with SHIFT+D.

- Highlight the white frame of the circle and add a dropshadow.

- Highlight the circle inlay.
Selections - All - Free - Not Free.
Delete the layer.
Copy and paste a paper of your choice.
Selections - Invert.
Press delete button.
Selection none.

- Highlight one of the small rectangle frame inlays.
Selections - All - Free - Not Free.
Delete the layer.
Copy and paste a paper of your choice.
Selections - Invert.
Press delete button.
Copy and paste your first tube and arrange it your frame.
Press delete button again.
Selection - none.
Add a dropshadow to your tube.
Merge the 3 frame layers (frame, tube, frame inlay) visible and dropshadow it.

- Repeat the above mention step with the other two rectangle frames.
Add different paper and tube.

- Highlight the "skulls"
I changed the colors that they fit to my tag.
Dropshadow them.

- Copy and paste frame4, resize if necessary and dropshadow it.
Move it under your big white circle layer.

- Copy and paste element4, resize and dropshadow it.
Arrange it over frame4 under the white circle.

- Copy and paste element3, resize and dropshadow it.
Mirror it vertical and arrange it on the right side of your tage.
(I moved a part under one of the frames and one part over a second frame)

- Copy and paste element11, resize and dropshadow it.
Arrange it to the left on the edge of your rectangle frame.

- Choose your font and as background color black.
Write your name and rotate it a bit.
Change the vector to a raster layer.
Selections - All - Free - Not Free.
Expand the selection about 2 or 3.
Add a new rasterlay and fill it with white.
Selection none.
Add some noise and move it under your name.
Merge these both layers and add a small dropshadow.

- At least just add copyright/watermark infos and save as!

Natures Gift

2010-04-06T05:29:00.000-07:00

This tutorial was written by and copyrighted to Seven on 06th April 2010.

For this tutorial you will need:

- PTU-kit Naturel from Sky Scraps which you can purchase here
- tube of your choice (I used the fantastic artwork of Igolochka)
- a nature picture of your choice (I got mine at stock.xchng)
- font of your choice (I used FleurDeLeah)

Let's start:

- Ope a new canvas 550 x 550 px.

- Copy and paste Frame9 and resize it if needed.

- With your magic wand click inside of the frame end expand the selection about 3px.

- Copy and paste a paper of your choice and move it under the frame layer.
Selection invert and press delete button.

- Copy and paste your picture and arrange it in your frame.
Press delete again.
Selection none.

- Reduce the opacity of your picture to 25-35 %.

- Dropshadow your frame.

- Copy and paste your tube and arrange it in your frame.
Erase parts of the body which are lookig throught the border below.
Dropshadow it.

- Copy and paste Element6, resize and dropshadow it.
Move this layer under your frame and paper layers and arrange it a bit to the bottom.

- Copy and paste Mesh3, resize and dropshadow it.
Arrage it under your frame a bit to the top.

- Highlight your frame layer.

- Copy and paste Mesh2, mirror it vertical and resize it.
Arrange it to the right of your frame.
Add a dropshadow.

- Copy and paste Feuillage1.
Resize and dropshadow it and arrange it also to the right over your mesh.

- Copy and paste Butterfly3, resize and dropshadow it.
Arrange it to the top on the left side.

- Copy and paste Feuillage3, resize and dropshadow it.
Move it to the edge of your frame on the left.

- Copy and paste Flower1 and resize it.
Arrange it over your feuillage and add a dropshadow.

- Choose two matching colors and your font and write your name.
Add a small dropshadow and merge all visible.

- At least add your watermark/copyright and save as.

Ready!

A Day without a Smile

2010-03-31T04:04:00.000-07:00

This tutorial was written by and copyrighted to Seven on 31th March 2010.

For this tutorial you will need:

- PTU-kit Tweet Heart from Grunge and Glitter Scraps which you can purchase here
- tube of your choice (I used the fantastic artwork of Suzanne Woolcott which you can purchase here)
- 2 fonts of your choice (I used Mea Culpa and Mrs Saint-Delafield)

Let's start:

- Open a new canvas 650 x 450 px.

- Copy and paste a scalloped frame (frame5) and resize it if needed.

- With your magic wand click inside of the frame and expand the selection about 3.

- Copy and paste a paper of your choice and move it under the frame layer.
Selection invert and press delete button.
Selection none.

- Copy and paste some hearts (chromeheartcluster) and resize them.
Chance the luminance to overlay.

- Highlight your frame layer and dropshadow it.

- Copy and paste a flowersterm, resize and dropshadow it.
Move it to the left of your frame.

- Copy and paste a flowertop of your choice.
Resize it and add a dropshadow.

- Copy and paste the fence, resize and dropshadow it.
Arrange it on the border of your frame.

- Copy and paste a wordart, resize it and add a dropshadow.
Move it in the middle of the top border of your frame.

- Copy and paste your tube.
Resize it if needed and arrange it to the right.
Add a dropshadow.

- Copy and paste the birds and resize them.
Arrange one to rhe left and one to the right of your tag.
Dropshadow.

- Choose a dark matching background colour and type your text in the middle of your frame.
Add a small dropshadow.

- Choose a matching background and forgrround colour and your second font and add your name.
Dropshadow it.

- At least just add copyright/watermark infos and save as.

Ready!

Industrial Fae

2010-03-31T02:49:00.001-07:00

This tutorial was written by and copyrighted to Seven on 31th March 2010.

For this tutorial you will need:

- PTU-kit Toxic from Sky Scraps which you can purchase here
- tube of your choice (I used the fantastic artwork of Joseph Corsentino which you can purchase at MPT)
- font of your choice (I used Hawaii_Killer)

Let's start:

- Open a new canvas 550 x 550 px.

- Copy and paste a round frame of your choice (Frame5).
Resize it if needed.

- With your magic wand click inside of the frame.

- Copy and paste a paper of your choice and move this layer under the frame layer.
Invert the selection and press delete button.
Invert the selection again.

- Add a new raster-layer

- Copy a broken glass layer (glass2) and paste it into the selection.
Selection none.

- Add a dropshadow to your glass and frame layer.

- Copy and paste your tube.
Resize it if needed and dropshadow it.
Arrange it in your frame and erase parts of the body/legs which are looking through the border of your frame.
(see my tag above for help)

- You can merge these layers visible.

- Copy and paste E10, resize it and move this layer und your frame layers.
Arrange it a bit to the bottom.

- Copy and paste E26, resize and dropshadow it.
Arrange it to the left a little bit to the top.
Some parts should be covered under the frame layer.

- Copy and paste MetalE6, resize and dropshadow it.
Arrange it in the middle.
Parts of it should be in the right top corner and in the left lower corner.

- Highlight your frame layer.

- Copy and paste a sign (E14), resize and dropshadow it.
Arrange it to the right top corner over your chain.

- Copy and paste Skull 6.
Resize and dropshadow it.
Arrange it under your sign.

- Copy and paste the spider (blackWidow) and arrange it to the right.
Dropshadow and resize it.

- Choose two matching colours and your font and write your name or text.
Add a small dropshadow.

- At least add watermark/copyirght infos and save as.

Yeaaah! It's done!

Blue

2010-03-14T06:38:00.000-07:00

This tutorial was written by and copyrighted to Seven on 14th March 2010.

For this tutorial you will need:

- PTU-kit So Blue from Cora's Creations which you can purchase here
- tube of your choice (I used the fantastic artwork of Nico Niemi )
- font of your choice (I used ToonishRegular)

Let's start:

- Open a new canvas 600 x 550px.

- Copy and paste frame-03 and resize if necessary.

- With your magic-wand click inside the four rectangels and expand the selection about2.

- Copy and paste a paper of your choice.
Move this layer under your frame layer and invert the selection.
Press the delete button on you keybord and invert the selection again.

- Copy and paste your tube and arrange it in these four frames.
Selection invert and press delete again.
Selection none.

- Dropshadow your tube and your frame.

- Merge these layer visible.

- Copy and paste frame-01 and resize it smaller.
Rotate it about 90 degrees to the left.
Arrange it the border in the middle of your frame and add a dropshadow.

- Copy and paste the star and resize it.
Mirror it horizontal and move it over your frame-01 a little bit to the left.
Dropshadow it.

- Copy and paste flower-04 and resize it.
Move it to the boarder of your frame and dropshadow it.

- Copy and paste tag2, resize it and arrange it on the right top corner of your frame.

- Copy and paste flower-01, resize and dropshadow it.
Arrange it on the right top corner over a bit over your tag.

- Choose a bright foreground colour, a blue background color and your font.
Write your name or text and arrange it on your tag.
Dropshadow it.

- At least just add copyright and/or watermark infos and save as.

Wasn't it easy?

Bella and Edward

2010-03-13T14:56:00.000-08:00

This tutorial was written by and copyrighted to Seven on 13th March 2010

Hrr Hrr, I think I'm one of the few people who don't like or who haven't ever read or seen Twilight.
I don't like cheeeeeesy Vampire Stories. Vampires are something mystical and dangerous. I prefer older vampire ones like Nosferatu, Dracula etc. Blade is very nice too. xD
But back to topic I've got a lot of lovely friends who are Twilight addicted.
So, I dedicate this tut to all my twilight loving friends!

For this tutorial you will need:

-Edward-kit from Polka Dot Scraps which you can get here
- 1 (Twilight) tube of your choice (I used the fabulous art of Zindy Nielsen. I used a free art and you can download it on her site.)
- Font of your choice (I used Monica)

Let's start:

- Open a new canvas 550x550px.
You can resize it later.

- Copy and paste frame1 and resize it if necessary.

- With your magic wand click inside of the three circles and expand the selection about 3.

- Copy and paste a paper of your choice.

- Selection invert and hit delete.
Selection none.
Move this layer under the frame layer.

- Highlight the frame layer and click with your magic wand in the first circle.
Expand the selection about 3.

- Copy and paste your tube and resize it if necessary.
Arrange Edward's or Bella's head in the circle.
Selection invert and press delete.
Selection none.
Move this layer und the frame layer.

- Repeat this step with the other 2 circles.
Add in one of them the head of the other and in the middle one both.

- Highlight your frame layer and dropshadow it.

- Merge these layers visible.

- Copy and paste a bow of your choice (element40), resize and arrange it on your frame where the first and second circle meet each other.
Duplicate this layer and mirror it vertical.
Move this layer down where the second and third layer meet each other.
Dropshadow both bows.
(See my tag above for help)

- Copy and paste a flower (element43) and resize it.
Move it over the middle of your first bow.
Duplicate and mirror the flower.
Move it over your second bow.
Dropshadow them

- Copy and paste the paperheart (element21) and mirror it vertical.
Move this layer under your frame layer.
Arrange the heart under your first circle a bit to the right.
Dropshadow it.

- Copy and paste the clock (element47) and resize it if necessary.
Move this layer under your frame layer and add a dropshadow.
Arrange in the bottom part of your tag.

- Choose a matching background colour and your font.
Write your name or text and rotate it about 90 degrees.
Add a small dropshadow and arrange it.

- At least just add copyright infos and/or watermark and save as.

Easy, hu?

Miss Drama Queen

2010-03-09T01:23:00.000-08:00

This tutorial was written by and copyrighted to Seven on 09th March 2010

For this tutorial you will need:

- Bea's Starry Night-kit, which you can download here.
- A tube of your choice (I used the fabulous work of Suzanne Woolcott. You can purchase her stuff here.)
- Mask of choice (I used WSL_Mask236 which you can get here)
- Font of your choice (I used Dominique)

Let's start!

- Open a new canvas 500 x 500px.

- Copy a paper of your choice and apply the mask.

- Copy and paste a rainbow and move it a bit to the top.
Resize it and add a dropshadow.

- Copy and paste a pocket (pocket02) and resize it if necessary.
Add a dropshadow and move it a bit under the rainbow.

- Copy and paste the flowers (flower01) and resize it.
Arrange it to the left of your pocket and dropshadow it.

- Duplicate this layer and mirror it.
Rotate it a bit and move this layer under the pocket layer.

- Copy and paste a paper heart, resize and dropshadow it.
Rotate it a bit of your liking and move this layer under the pocket layer a bit in the middle.
(see my tag above for help)

- Highlight your pocket layer.

- Copy and paste a beadstring and resize it.
Move it a bit to the down and add a small dropshadow.

- Copy and paste a candy heart.
Resize, rotate and dropshadow it.

- Copy and paste your tube.
Arrange it to the right over your candy heart.
Dropshadow it.

- Copy and paste a butterfly.
Resize and dropshadow it.
Arrange it on your rainbow.

- Choose a matching background colour and your font and add your name.
Give it a small dropshadow.

- At least just add copyright and/or watermark infos and save as.

Fairy Kiss

2010-03-06T11:39:00.000-08:00

This tutorial was written by and copyrighted to Seven on 6th March 2010.

For this tutorial you will need:

- Touch Me's PTU-kit Romantic Love which you can purchase here
- 2 fairy tubes of your choice (I used stunning posers from Lisa K.)
- font of your choice (I used Mon Amour)

Let's start:

- Open a new canvas 650 x 500px

- Copy and paste a frame (elemts_(41)) and resize if necessary.

- With your magic-wand click inside your frame and expand the selection about 2.

- Copy and paste a paper of your choice.

- Selections invert and press delete.
Selections none.

- Move this layer under the frame layer.

- Copy and paste your tubes and arrange them in your frame.
Erase the parts of them which are looking through the frame.
Add a dropshadow and their mix mode on overexpose.

- Highlight he frame layer and dropshadow it.

- Merge these layers visible

- Copy and paste the ivy (elemts_(62), resize and rotate it a bit.
Move it under the frame and add a dropshadow.

- Copy and paste the fishnet (elemts_(50)), resize a bit and add a small dropshadow.

- Highlight your frame layer.

- Copy and paste the doodled flower (elemts_(34)), resize and dropshadow it.
Move it to the left higher corner of your frame.

- Now you can decorate your tag with love or like I did:

- Copy and paste the ladybug.
Resize and dropshadow it.
Move it to the left over the flower doodle.

- Copy and paste the fishnet (elemts_(50)) again, resizeit very small and add a small dropshadow.
Move this layer to the left higher bottom under the ladybug and doodle flower.

- Copy and paste the hearts (elemts_(28)).
Resize and dropshadow it.
Arrange it to the right.

- Copy and paste the string (elemts_(70))
Move it in the middle of your frame boarder.
Resize and dropshadow it.

- Copy and paste the pillow heart (elemts_(11)) and resize it.
Move it to the right and add a dropshadow.

- Choose a matching background colour and your font and write your name or text.
Give it a small dropshadow.

- At least just add copyright info and/or watermark

Loving You

2010-03-04T11:56:00.000-08:00

This tutorial was written by and copyrighted to Seven on 04th March 2010.

For this tutorial you will need:

- Stamp-Frame, Bow, Ladybug, Heart-Glitter-String.
Download my supplies here
(I collected the frame, bow and heart string in several yahoo groups - if they are yours please let me know and I'll give credit or remove it. The bug is from my Saranghae kit)
- tubes of your choice (I used the fabulous Valentine Element Pack from Suzanne Woolcott. You can purchase her stuff here.)
- Xero - Frittalary
- Font of your choice (I used Yummah Strawberriez)

Let's start:

- Open a new canvas 550x360px.

- Choose two matching colours as foreground and background colour.

- Copy and paste your stamp frame and resize it if necessary.

- With your magic wand click inside of the first frame.
Expand the selection about 4 px and add a new raster layer.
Fill this layer with your first colour.
Aplly Xero - Fritilliary with the standar settings.
Selection none.
Move this layer under the frame layer.

- Repeat the above mentioned step with the other frame but this time you've to use your second colour.

- Merge the two colour rectangles.

- Copy and paste the glitter-heart-string and move it in the middle of the frames.
Erase these parts which are looking through. Add a small dropshadow.

- Highlight your frame layer and add a small dropshadow if necessary.

- Add your tube and move it to the right.
Resize and dropshadow it.

- Copy and paste the bow and arrange it on the tag.
(I added mine to the head of my tube)
Dropshadow.

- Copy and paste flowers (or whatever your using) and move them into the left frame.
Erase the parts which are looking over the border below.
Dropshadow it.

- Copy and paste the ladybug, resize and dropshadow it.
Arrange it on your tag.

- If you want you can decorate your tag with other elements.

- Choose your front and a matching colour and add your text and/or name.
Give it a small dropshadow.

- At least just add copyright and/or watermark infos and save as.

Flirt

2010-02-22T12:18:00.000-08:00

This tutorial was written by and copyrighted to Seven on 22nd February 2010

For this tutorial you will need:

- Show Must Go On kit from Cadi's Fun Scraps which you can download here
- a tube of your choice - I am using the beautiful artwork of Igolochka
- Flirt brush or wordart of choice ( I don't knnow where I got mine, so I cannot supply)
- Font of your choice (I used Monsieur La Doulaise)

Let's get ready!

- Open a new canvas 550x550px.

- Copy and paste Frame09 and resize it.

- With the magic wand click inside of the frames and expand the selection about 3.

- Copy and paste a paper of your choice.
Invert the selection and press delete.
Selection none.
Move this layer under your frame layer.

- Copy and paste a glitter of your choice and resize it.
Move it under the frame and paper layer.

- Highlight your frame layer and dropshadow it.

- Copy and paste your tube, resize and dropshadow it.
Arrange it in the right frame and erase the body parts which are looking throught the frame boarder.
(see my tage above for help)

- Add your brush or wordart in the left frame.

- Copy and paste a boot of your choice.
Resize and dropshadow it.
Arrange it on the left side of your left frame.

- Copy and paste a corset and resize it.
Rotate it a bit and arrange it over your boot on the left side.
Add a dropshadow.

- Choose a matching background colour and your font and write your name.
Add a small dropshadow to it.

- At least just add copyright info and/or watermark and save as.

This was a quicky!

Fantasy

2010-02-20T07:59:00.000-08:00

This tutorial was written by and copyrighted to Seven on 20th February 2010.

For this tutorial you will need:

-Fantasy-kit from Polka Dot Scraps which you can get here
- A tube of your choice (I used one of the fairies which came with the kit. They are from Lisa K.)
- Mask of choice (I used WSL_Mask220 which you can get here)
- Font of your choice (I used 2Peas THINK PINK)

Let's begin:

- Open a new canvas 550x550px.

- Copy and paste a paper of your choice and apply the mask.

- Copy and paste frame-4 and resize it.

- With your magic wand click inside of your frame, so that everything in the big green one is selected. Expand the selection about one px.

- Copy and paste the cloudy paper (paper1) and move it under your frame layer.
Invert the selection and press delete.

- Add a dropshadow to your frame.

- Highlight the paper layer.

- Copy and paste element8 (grass) resize and dropshadow it.
Arrange it a bit to the bottom and erase the parts which are looking through the frame.

- Copy and paste the house (element5) move to to the left.
Resize and add a dropshadow.
Erase the party which are looking through the frame.

- Copy and paste other elements like mushrooms, flowers, clouds, birds etc. and decorate your "picture with it"

- Highlight your frame layer.

- Copy and paste element21 (flower), resize and dropshadow it.
Arrange it on the right side of your frame.

- Copy and paste element20 (flower), resize and dropshadow it.
Arrange it to the right side a little bit over element21.

- Copy and paste element15, resize and dropshadow it.
Move it to the bottom.

- Copy and paste your tube and resize it if necessary.
Move it to the left of your frame and add dropshadow.

- Choose a darker foreground and a lighter/brighter background colour and write your name.
Dropshadow it.

- At least just add copryight infos and/or watermark and save as.

Carpe Diem

2010-02-13T07:19:00.000-08:00

This tutorial was written by and copyrighted to Seven on 13th February 2010.

For this tutorial you will need:

- Creative Intentionz' Scrapkit "Dip Me In Choclate", which you can purchase here
- 2 Tubes of your choice. I used the fabulos work of Rion Vernon alias Pin Up Toons which you can purchase at C.I.L.M
- "Carpe Diem" Template von Tammy which you can get here
- Mask of choice (I used WSL_Mask226 which you can get here)
- a font of your choice (Monika)
- Xero - Radiance

Let's begin:

- Open the template and duplicate it with CTRL+D.
You can close the the original one.

- Delete the following layers (inclusive the shadowed ones):
"Raster17, 15, 12, 11"

- Copy and paste a paper of your choice.
Move it to the bottom.
Apply you mask.

- Highlight your mask layer.
Copy and paste HeartWreath 1 or 2 and add a small dropshadow.

- Highlight the right rectangle (Raster2).
Selections - all - free - not free
Delete this layer and add a new one.
Copy a light paper and paste it into selection.
Selection - frame selection - both sides - 4 px
Add a new raster layer and copy a darker paper.
Paste it into the selection.
Selection none.
Add a dropshadow to the frame.

- Repeat the above mentioned step with the left rectangle (Raster5), with the middle one (Raster6) and with the circle (Raster3).
In the middle one paste a darker one in the rectangle and a lighter one for the frame.

- Highlight Raster6.
Selections - all- free - not free
Copy and paste Dangler and resize it.
Selections - invert.
Hit delete.
Selections - none.
Dropshadow your dangler.

- Highlight Raster 5
Selections - all - free - not free
Copy and paste your tube.
Selections - invert and push delete.
Selection - none.
Apply Xero - Radiance with the standard settings to your tube and add a dropshadow.
Change it to luminance (legacy).

- Highlight Raster 2 and repeat the step above.
Copy and paste your second tube.

- Highlight Raster 3.
Selections - all - free - not free
Copy and paste CafeCup and arrange it
Selections - invert and push delete.
Selection - none.
Add a dropshadow.

- Highlight the wordart (Raster13) and colorize it that is matches to your tag.
Add a small dropshadow.

- Copy and paste a VineFlower, resize and dropshadow it.
Arrange it to the left side under your wording.

- Copy and paste Choclate Plate and arrange it to the right.
Resize and dropshadow it.

- If you want you can decorate your tag with some of the other beautiful elements.

- Choose a matching color and your font and write your name.
Add a small dropshadow.

- At least just add copyright info and/or watermark and save as.

Puh, we're ready!

Fairy In My Pocket

2010-02-10T10:52:00.000-08:00

This tutorial was written by and copyrighted to Seven on 10th February 2010.

For this tutorial you will need:

- My PTU-kit Saranghe which you can purchase here or here
- A fairy tube of your choice (I used the tube which came with the kit. It's a stunning poser from Lisa K.)
- font of your choice (I used Liorah BT)

Let's start:

- Open a new canvas size 500 x 500 px.
You can resize it later.

- Copy and paste the bag (bag_01), resize it and add a nice dropshadow.

- Copy and paste the beads, resize and dropshadow them and move them under the bag layer.

- Copy and paste the notelock, resize and dropshadow it.
Arrange it.

- Copy and paste a leave, resize and dropshadow it.
Move it to the left.

- Copy and paste flower or heart elements and arrange them.
Don' forget to resize and dropshadow it.

- Highlight the leaf-layer and copy and paste a lollipop.
Resize and add a dropshadow.

- Copy and paste your fairy tube.
Resize it and dropshadow.
Arrange it to a matching place "in" your bag.

-Highlight your bag layer
Make sure that all the elements and fairy are covered by the bag.

- Copy and paste a ribbon (ribbon02) and resize it.
Arrange it over your bag and dropshadow it.

- Copy and paste the doll and the ladybug or other elements.
Resize and dropshadow them.
Arrange them over your bag and ribbon.

- Copy and paste the marker and resize it.
Move it a little bit of the lower part of the bag.
Rotate it and drophadow it a bit.

- Set a matching background color and choose your font.
Write your name and add a dropshadow.

- At least just add copyright infos and/or watermark and save as.

This was easy, or?

Nerdy Tea Party

2010-02-06T05:25:00.000-08:00

This tutorial was written by and copyrighted to Seven on 06th February 2010

For this tutorial you will need:

- Chassity's FTU-kit Tea Time which you can download here
- A tube of your choice (I used a cool tube of Anarkitty)
- Mask of choice (I used WSL_Mask254 which you can get here)
- two fonts of your choice (I used 2Peas Mr Giggles and A&S Black Swan)

Let's start:

- Open a new canvas 550x550 px.
You can resize it later.

- Copy and paste a paper of your choice and apply the mask.
(I made mine a bit smaller after I added the frame.)

- Copy and paste a frame (frame-12, 13, 14, 15 or 16) resize it and rotate it about 90 degrees.

- With your magic wand click inside the frame and expand the selections about 5.

- Copy and paste a paper of your choice, move it under the frame layer and invert the selection.
Press delete.
Selection none.

- Highlight your frame layer and dropshadow it.

- Copy and paste your tube, resize it and move it in the middle of your frame.
Erase parts of the body which are looking over the boarder below.
Dropshadow your tube.

- Copy and paste coffee pot, coffee cup and the cakes.
Resize and dropshadow them.
Arrange them on your tag.

- Copy and paste a tea bag, resize and dropshadow it.
Move it to the left higher corner.

- Copy and paste a bow of your choice.
Resize and dropshadow it.
Move it to the left ver your tea bag.

- Choose a matching background colour and your font.
Write your text (Nerdy Tea Party) and rotate it about 90 degrees.
Add a small dropshadow and position it near your frame.

- Choose your second font and write your name.
Dropshadow i and arrange it.

- At least add copyright infos and/or watermark and save as.

Pretty easy, or?

Tamie's Valentine

2010-01-30T09:42:00.000-08:00

This tutorial was written by and copyrighted to Seven on 30th January 2010.

For this tutorial you will need:

-Cupid-kit from Addictive Pleasures which you can get here
- A tube of your choice (I used a fabulous tube of Ismael Rac which you can purchase at AMI)
- Font of your choice (I used Ministry Script Stylistic HFF)

Let's begin:

- Open a new canvas 600 x 400px.

- Copy and paste ele58 and resize it if necessary.

- With your magic wand click inside of the circle and expand the selection about 2.

- Copy and paste a paper of your choice.
Invert the selection and hit delete button.
Invert again.

- Copy and paste the tube of your choice, resize if necessary and arrange the face (or whatever part you like) in the the center of the circle.
Invert the selection and press the delete button.
Selection none.

- Add a small dropshadow to your tube and ribbon-frame-layer.
Merge these 3 layers visible.

- Copy and paste the cloud (ele63) and move it under your frame-layer.
Resize it a bit.

- Copy and paste a heart (ele9) and resize it if necessary.
Move this heart under the circle of your ribbon-frame.
Add a dropshadow.

- Copy and paste the glitter stars (ele44).
Resize and dropshadow them.
Move it a bit to the left.

- Highlight your ribbon layer

- Copy and paste ele88, resize and dropshadow it.
Arrange it on your ribbon, that every knot of the bows is touching the string from the frame.

- Copy and paste the glass hearts (ele25), resize and dropshadow them.
Arrange them to the right a little bit over the bow of the frame.

- Choose a nice maching colour and font and write your name.

- At least just add Copyright and watermark infos and save as.

Ready ♥

Violet Rock

2010-01-30T03:28:00.001-08:00

his tutorial was written by and copyrighted to Seven on 30th January 2010.

For this tutorial you will need:

-Unlikely Ballad-kit from Polka Dot Scraps which you can get here
- A tube of your choice (I used a fabulous tube of Ismael Rac which you can purchase at AMI)
- PlugIn Xero - Radiance
- Mask of choice (I used WSL_Mask208 which you can get here)
- Font of your choice (I used HawaiiLover)

Let's begin:

- Open a new canvas 600x600 px.

- Copy and paste frame02 and resize it.

- With your magic wand click inside of the frame and expand the selections about 5px.

- Copy and paste a paper of your choice.
Invert the selection and press delete.
Invert the selection again.

- Move this layer under the frame layer.

- Copy and paste your tube and arrange it in the frame.
Selection invert and press delete.
Selection none.

- Apply the Xero Radiance Plugin with the standard settings

- Change the opacity of your tube on luminance (legacy).

- Merge these 3 layers and add a dropshadow.

- Copy and paste another paper of your choice.
Move it below your picture layer and apply the mask.

- Copy and paste element19 and resize it.
Move it a bit to the top and add adropshadow.

- Duplicate this layer and mirror it horizontal.
Merge the two element layer and duplicate it again.
Rotate it about 90 degrees.

- Copy and paste element23, resize and dropshadow it.

- Highlight your frame/picture layer.

- Copy and paste element46, arange it and resize it if necessary.

- Copy and paste element16, resize and dropshadow it.
Mirror it and move it to the left side of your picture.
I also coloured it violet.

- Copy and paste element25 and resize it.
Move it to the boarder of your frame and add a small dropshadow.

- Copy and paste your tube and resize it if necessary.
Move it to the right side of your frame/picture.
Add a dropshadow.

- Choose black as foreground and a maching colour as background colour and write your name.
Add a small dropshadow.

- At least just add copyright infos and/or watermark and save as.

Pink Valentine

2010-01-24T03:41:00.000-08:00

This tutorial was written by and copyrighted to Seven on 24th January 2010.

For this tutorial you will need:

-Always in Love-kit from Bea Creations which you can get at Twilight Scraps
(It's her part of the january store collab kit)
- A tube of your choice (I used a fabulous tube of Ismael Rac which you can purchase at AMI)
Mask of choice (I used WSL_Mask208 which you can get here)
- Font of your choice (I used Dr.Crabfeld)

Let's start:

- Open a new canvas 550x550px.

- Copy and paste a paper of your choice and apply the mask.

- Copy and paste the rose-heart-frame (frame04) and resize it.

- With your magice wand click inside the center of your frame and expand the selection about 5px.

- Copy and paste another paper of your choice.
Move it under the frame layer.

- Invert the selection and press delete.
Invert the selection again.

- Copy and paste the glitterrain (deco04) and arrange it in your frame.
Selection invert and press delete.
Selection none.
Add a small dropshadow to your glitter.

- Dropshadow your frame.

- Copy and paste bling02 and move it under the paper layer.
Duplicate it 3 times (you should have 4 blings now) and arrange them for your liking.
Add a small dropshadow.

- Copy and paste your tube, resize and dropshadow it.
Arrange it in your frame.
Erase parts of the body which are looking over the frame.
(see my tag for help)

- Copy and paste the doves with heart (dovewithheart01), resize and dropshadow it.
Move it to the cusp of your heart.

- Copy and paste a butterfly (butterfly05) resize and rotate it abit.
Arrange it on your frame and add a dropshadow.

- Copy and paste the bow with the bell (heart05) and resize it.
Move it to the right middle boarder of your heart-frame.
Add a small dropshadow.

- Duplicate this layer and mirror it.

- Add your name to the tag.

- At least just add copyright infos and/or watermark and save as.

I Do

2010-01-09T06:26:00.001-08:00

This tutorial was written by and copyrighted to Seven on 09th January 2010

For this tutorial you will need:

- Design by Ali's I DO -kit which you can get here
- 1 couple-tube of your choice (I used the fabulous art of Zindy Nielsen, which you can buy at her own shop.)
- Font of your choice (I used Diva)

Let's start!

- Open a new canvas 600x600 px.

- Copy and paste Frame3, resize it and add a soft dropshadow.

- Copy and paste Frame2 and resize it.

- With your magic tool click inside of the frame and expand the selection about 7 px.

- Copy and paste a paper of your choice.
Invert the selection and press delete.

- Invert selection again.

- Copy and paste your tube and move it in the middle of your frame.
Invert the selection and press delete.

- Selection none

- Move the paper and tube layer under the frame2 layer.

- Add a soft dropshadow to your frame.

- Copy and paste Silver Wedding Band 2 (ring) and roate it about 90 degrees.
Resize it.

- Duplicate this layer and mirror it.

- Postion the two rings in the middle of your frame border.
Merge them together and add a dropshadow.

- Now you can decorate your tag as you wish or like I do:

- Copy and paste the Crystal Dragonfly, resize it and roate it a bit.
Move it to the left upper edge and add a small dropshadow.

- Copy and paste the Wedding Glas1, resize and position it to the right side.
Dropshadow it softly.

- Choose a lighter forground colour, a darker background colour and your font and add your name or text.

- Dropshadow it softly.

- At least just add copyright information and/or watermark and save as.

Ready!

Let's visit the Moon

2010-01-03T09:42:00.000-08:00

This tutorial was written by and copyrighted to Seven on 03rd January 2009

For this tutorial you will need:

- Chassity's Starry Night-kit, which you can get exclusively here.
- A tube of your choice (I used the fabulous work of Suzanne Woolcott. You can purchase her stuff here.)
- Mask of choice (I used WSL_Mask39 which you can get here)
- Font of your choice (I used A&S Black Swan)

Let's start:

- Open a new canvas 550x550 px

- Copy and paste a paper of your choice and apply the mask.
(I enlarged the mask about 115%)
Reduce the oppacity a bit.

- Copy and paste frame5, resize and move it to the ground.

- With your magic wand click inside of the frame and expand the selection about 5.

- Copy and paste a paper of your choice, invert the selection and press delete.
Selection none.
Move this layer under the frame layer.

- Highlight your frame layer.
Dropshadow it.

- Copy and paste the clouds (element1 & element2).
Resize them, duplicate them and decorate your tag with them.
I used two in the "sky" (the part over your frame), one in the frame and one over the frame.

- Copy and paste the stars (element43), resize it an duplicate it.
Arrange them in the "sky" and add a dropshadow.

- Copy and paste the moon (element44) and resize it.
Mirror it and rotate it a bit.
Dropshadow it.

- Copy and paste the ladder (element7), resize and dropshadow it.
Arrange it in the middle of your tag.
The bottom part shoul touch the frame and the higher part should touch the moon.

- Copy and paste your tube, resize and dropshadow it.
Postion it in front of the ladder.

- Choose your font and write your name on one of the cloud.
Add a dropshadow.

- At least just add copyright and/or watermark and save as.

Ready!

Whispered Pixie

2009-12-27T13:48:00.000-08:00

This tutorial was written by and copyrighted to Seven on 27th December 2009.

For this tutorial you will need:

- Wicked Princess Scraps' PTU-kit Whispered Pixie which you can purchase here
- A fairy tube of your choice (I used the one which came with the kit)
- Mask of choice (I used WSL_Mask220 which you can get here)
- a font of your choice (Mr Lackboughs)

Let's begin

- Open a new canvas 650x450 px.

- Copy and paste a paper or fill it with colour of your choice.
Apply the mask on it.

- Copy and paste pixieflourish, resize and move it to the left side.
Duplicate this layer and mirror it vertical and horizontal.
Add a small and soft dropshadow.

- Copy and paste the cloud and resize if necessary.

- Copy and paste dangle.
Resize it and move it bit to the top.
Erase with a soft eraser parts of the string.

- Copy and paste the bench.
Resize and dropshadow it.
Move it a bit to the down.

- Copy and paste pansy and resize it.
Arrange it on the side of the bench.
Add a dropshadow.

- Copy and paste daffodill and resize it very small.
Move it to the left side of your bench.
Duplicate this layer and mirror it vertical.
Add dropshadow.

- Copy and paste ball.
Resize it and position it to the right on your bench.
(It should stand on it)
Add a smal dropshadow.

- Copy and paste your fairy.
Resize and move it in the middle of the bench.
She should sit or lie on it.
Add a dropshadow to her.

- With a nice font write your name on your tag and dropshadow it.

- At least you just need to add copyright infos and save as.

This was easy, or?

2010

2009-12-27T07:20:00.000-08:00

This tutorial was written by and copyrighted to Seven on 27th December 2009.

For this tutorial you will need:

- Chassity's FTU-kit Bling In The New Year which you can download here
- A tube of your choice (I used an amazing tube of Keith Garvey which you can purchase at MPT)
- Mask of choice (I used WSL_Mask75 which you can get here)
- a font of your choice (I used MeaCulpa)

Let's start:

- Open a new canvas 550x550 px.

- Copy and paste a paper of your choice and apply the mask.

- Copy and paste frame2 and resize if necessary.

- With you magic wand click inside the frame and expand the selection about 6px.

- Copy and paste a paper of your choice and invert the selection.
Press delete.
Selection none.

- Dropshadow your frame.

- Copy and paste element22 and move it to the left.
Move this layer under the frame/paper layer.

- Duplicate the leafes 3 times and postion every leaf so that on every side of the frame is a part of them. (see my tage above for help)
Merge those 4 layers together and add a dropshadow.

- Copy and paste frame5, resize if necessay and add dropshadow.

- Highlight your frame2 layer.

- Copy and paste your tube.
Resize if necessary and add a dropshadow.
Erase parts of the body which are looking throught the frame.
She should be in the frame but the head should be over the frame.
(see my tag for help)

- Copy and paste element7 and resize it.
Move it to the right.

- Duplicate this layer and mirror it vertical and horizontal.
Move this duplicated layer under your tube layer.

- Dropshadow them both.

- Copy and paste element4, resize and rotate it a bit.
Move this layer under the element7-layer and postion it to the left.
Add a dropshadow.

- Copy and paste element10, mirror it horizontal and vertical.
Resize it and add a drpshadow.
Move it also under the element7-layer.
The knot of its string should be under one of the paper-flowers.

- Write your name or text on the tag.

- At least just add copyright infos and save as.

Ready ♥

My Sketchbook AC

2009-12-25T13:41:00.001-08:00

This tutorial was written by and copyrighted to Seven on 25th December 2009.

For this tutorial you will need:

- My PTU-kit My Diary which you can purchase here
- A lying tube of your choice (I used a totally sexy tube of Elias Chatzoudis which you can purchase at MPT)
- Mask of choice (I used WSL_Mask297 which you can get here)
- 2 fonts of your choice (I used Pussycat and LunaBar)

Let's start:

- Open a new canvas 600x600 px. You can resize it later.

- Copy and paste a paper of your choice and apply the mask.
Merge the mask layer.
Reduce the opacity to 60%.

- Copy and paste one of the beads (bead_05, _06, _07 or _08), resize it and dropshadow it.
Move it to the left upper side.

- Copy and paste another one of the beads, resize and dropshadow it.
Mirror it vertical and horiontal.
Move it to the right lower side.

- Copy and paste one of the note books (block_03) and resize it if necessary.
Rotate it a little bit of your choice.

- Copy and paste one of the stickers (sticker_01, _02, _03 or _04) and move it in the middle of your notebook.
Don't forget to resize and rotate it.

- Copy and paste one of the keychains, resize and move it to the right ring of the notebook.
Erase some parts of the keychain ring so that it looks if it woul hand on it.
(see my tag above for help)
Add a dropshadow.

- Copy and paste one of the bows, resize it and move it to the top on the rings of the book.
Dropshadow it.

- Copy and paste the star string and resize it.
Move this layer under the bow layer and add a dropshadow.

- Copy and paste one of the marker, resize if necessary and add a dropshadow.
Move it to the lower part of your book.

- Copy and paste your woman tube and arrange it on the marker.
She should lying on it.
Dropshadow her.

- Choose a background and a foreground colour and a fat font (Pussycat) write your text and dropshadow it.

- Close the foreground colour and choose a light background colour and you written font (LunaBar).
Write your name over your bigger text and give it a small dropshadow.

- At least you just need to add copyright/watermark infos and save as.

Hope you liked it!

Cute Candy Girl

2009-12-23T00:41:00.000-08:00

his tutorial was written by and copyrighted to Seven on 22nd December 2009.

For this tutorial you will need:

-Rieneke's PTU-kit Black White Collection: Pink which you can get here
- A tube of your choice (I used a totally cute tube of Moshilove which you can purchase at MPT)
- 2 fonts of choice (I used Pussycat and Rage Italic)

Let's begin:

- Open a new canvas 600x450px.

- Select all.
Copy a paper of your choice and paste into the selection.
Selection none.

- Copy and paste a ribbon frame of your choice (frame1 or 2), resize and add a dropshadow.
Move it to the left side.

- With your rectangle selection tool draw a selection over the frame and add a new raster layer.
Copy a paper and paste it into the selection.
Move this layer under the frame layer.

- Copy and paste your tube and postion it into the frame.
Resize and dropshadow it.
Maybe you have to erase parts which are looking trough the frame.

- Copy and paste the beads.
Resize if necessary and dropshadow them.
Move them under the frame-paper layer.

- Copy and paste the crown, resize and dropshadow it.
Move it on the head of your tube, but over the frame.

- Duplicate this layer.
Resize it and rotate it a bit.
Move it into the right corner.

- Copy and paste different hearts and flower elements.
Decorate your tag with them.

- Choose a pink/dark font as forgreound colour (no background colour) and a fat font (Pussycat).
Write your name and rotate it about 90 degrees.
Dropshadow it.

- Close the forgreound colour and choose a lighter background colour and your handwritten font (Rage Italic).
Write a small text like Cute Candy Girl and rotate it also about 90 degrees.
Move it over your name.

- Decorate your name with two smaller elements.

- At least just add a 1px border and add copyright infos and save as.

Ready ♥

Awaiting Christmas

2009-12-02T03:32:00.000-08:00

This tutorial was written by and copyrighted to Seven on 02nd December 2009

For this tutorial you will need:

- Sabs' Principessa -kit, which you can get here.
- A tube of your choice (I used the fabulous work of Suzanne Woolcott. You can purchase her stuff here.)
- A winter-night picture of your choice. (Mine is from stock.xchng)
- Mask of choice (I used WSL_Mask259 which you can get here)
- Font of your choice (I used Edwardian Script)

Let's start:

- Open a new canvas 550 x 450 px.

- Copy and paste a paper of your choice and apply the mask.

- Copy and paste the window (Window_01) and resize if necessary.
Dropshadow it.

- Use your rectangle selection tool and draw a rectangle so that the window parts are selected.
(click on image for larger view)

- Copy and paste your picture.
Invert the selection and hit delete.
Invert selection again.
Move this layer under the window layer.

- Copy and paste the glitter (BrilliantRain_01) and invert the selection again.
Press delete.
Selection none.
Add a small dropshadow.

- Copy and paste one of the moons, resize it and move it also to a nice place in your window.

- Highlight the window layer.

- Copy and paste the first curtain (Curtain_1) and resize it and move it in the middle of your window.
Copy and paste the other curtain (Curtain_02) and position it over your window.
(See my tag above for help)

- Copy and paste one of the bow ornaments (Ornament_05 or _06), resize it and move it in the middle of the head curtain.
Dropshadow it.

- Copy and paste other elements from your kit (I used a snowflake, bells and a stocking)
and decorate your window with them.
Don't forget to dropshadow them.

- Copy and paste one of the candy canes (CandyCane_01 or _02) and resize it.
Position it on the right side of your window over the curtain and dropshadow it.
Duplicate this layer and mirror it.

- Copy and paste your tube and arrange it on the ledge.
Dropshadow it.

- Choose your font and write your name or text on it.

- At least just add copyright and/or watermark infos and save as.

Ready ♥

Golden Christmas

2009-11-28T08:35:00.000-08:00

This tutorial was written by and copyrighted to Seven on 28th November 2009.

For this tutorial you will need:

- Candy Coated Scraps' PTU-kit Golden Holiday which you can purchase here
- A tube of your choice (I used the beautiful artwork of Marco Guaglione which was in the MPT christmas gift.)
- Mask of choice (I used Vix_Mask109 which you can get here)
- font of choice (I used MT Under Your Skin)

Let's begin:

- Open a new canvas 550x550px.

- Copy and paste a paper of your choice and apply the mask.
Duplicate this mask layer and merge down.

- Copy and paste the round wood frame (elem14) and resize if necessary.

- With your magic wand click inside of the frame and expand the selection about 10px.
Add a new raster-layer.

- Copy an other paper of your choice and paste it into the selection.
Selection none.
Move this layer under the frame layer.

- Highlight your frame layer and dropshadow it

- Copy and paste the wreath (elem42), resize and dropshadow it.

- Copy and paste your tube and arrange it in the frame/wreath.
Erase the parts of the body which are looking over the wreath.
(see my tag for help)
Dropshadow it.

- Copy and paste a star (elem68), resize it and move it on the top of your wreath (under the tube layer).
Add a dropshadow.

- Copy and paste the bells (elem67) and move it on your wreath to the left side.
Resize and dropshadow it.

- Copy and paste the balls (elem79), move it to the ride side, resize and dropshadow it.

- Copy and paste a golden tree (elem73) move it to the left, resize and dropshadow it.

- Copy and paste one of the presents (elem12) and arrange it in front of the tree.
Add a dropshadow.

- Choose a paper in your background color and write your name on your tag.
Dropshadow it.

- At least just add copyright and/or watermark infos and save as.

Ready ♥

Venice

2009-11-19T12:48:00.001-08:00

This tutorial was written by and copyrighted to Seven on 19th November 2009.

For this tutorial you will need:

- Sox Sational Scraps' PTU-kit Vintage Diaries which you can purchase here
- A tube of your choice (I used one which cam with the kit)
- Picture (of Venice) of your choice (I got mine from stock.xchng)
- Mask of choice (I used WSL_Mask220 which you can get here)
- font of choice (I used Edwardian Script)

Let's start:

- Open a new canvas 550x550px

- Copy and paste paper of your choice and apply your mask.

- Copy and paste your frame and resize it if necessary.

- With your magic wand click inside the frame and expand the selection about 5px.

- Copy and paste another paper and invert the selection.
Press delete.
Selection none.

- Move this layer under the frame layer.

- Highlight your paper layer.

- Selection - all - free - not free.

- Copy and paste your picture, resize if necessary and invert the selection.
Press delete again.
Selection none.

- Change the blend mode of your picture on luminance (legacy) and reduce the opacity to 60%.

- Add a dropshadow to your frame.

- Copy and paste the leafs (Leafs), resize them and add a small dropshadow.
Move them in the left higher edge.

- Copy and paste the tag (Tag), resize and dropshadow it.
Move it over the leafs.

- Copy and paste one of the roses (Rose1, Rose2, Rose2) and resize it very small.
Add a dropshadow and position it over the knot from the dtring of the tag.

- Copy and paste the street lantern (Lamp), resize if necessary and add a dropshadow.
Position it on the right side of the frame.

- Copy and paste the bush (Bush), resize and dropshadow it.
Move it over the lantern.

- Copy and pase your tube and dropshadow it.
Resize it if necessary and move it in front of the frame.

- Write your name on the tag.

- At least you just need to add copyright and watermark infos and save as.

Ready ♥

Chayenne

2009-11-15T06:43:00.001-08:00

This tutorial was written by and copyrighted to Seven on 15th November 2009
It's dedicated to the lovliest person from the Netherlands! ♥

For this tutorial you will need:

- Summer Garden kit from Scrapity Scrap and More which you can download here
- a tube of your choice - I am using the beautiful artwork of Kate Lightfoot
- Mask of your choice (I used WSL_Mask220 which you can get here)
- Font of your choice (I used A&S BlackSwan)

Let's get ready!

- Open a new canvas 600x600px.

- Copy and paste a paper of your choice and apply the mask.

- Copy and paste the lace frame (frame7), resize it a bit and rotate it about 90 degrees.
Add a small dropshadow.

- Copy and paste paper 2 (paper (2)) and move it under the frame layer.
(A little bit of blue and the green should be in the frame)

- With your erase or your selection tool erase the part which are looking through under the frame.

- Copy and paste the grass (grass2), resize it and erase the parts again which are looking through the frame. Add a small dropshadow.

- Highlight your frame layer

- Copy and paste your tube and move it to the left edge.
Resize if necesarry and add a dropshadow.
Erase the parts of the body which are looking over the frame.
(see my tag for help)

- Highlight your paper layer.

- Copy and paste the red flowers (flower6, 7, 8), resize and decorate your picture with them
Add a small dropshadow.

- Highlight your frame layer.

- Copy and paste doodle2 and move it to the left side under your tube layer.
Dropshadow it.

- Copy and paste foliage3, resize and rotate it about 90 degrees.
Move it to the right side on your frame and add a dropshadow.

- Copy and paste the daisy (flower9), mirror it and resize it.
Position it on the right upper edge and dropshadow it.

- Copy and paste the flowerheart (flower14), resize and dropshadow it.
Move it in the middle of the foliage on the right frame side.

- Highlight your frame layer

- Copy and paste a ribbon (ribbon17) mirror it and move it over your frame.
Add a dropshadow.

- Copy and paste a yellow flower (flower18) and resize it very small.
Dropshadow it and position it over the bow of your ribbon.

- Write your name on your tag and add a nice dropshadow.

- At least just add copyright/watermark info and save as.

READY!

Sweet Winter Wishes

2009-11-14T13:14:00.000-08:00

This tutorial was written by and copyrighted to Seven on 14th November 2009.

For this tutorial you will need:

- Bea's PTU-kit Christmas for a Princess which you can get here
- A tube of your choice (I used a totally sexy tube of Elias Catzoudis which you can purchase at MPT)
- 2 Masks of choice (I used WSL_Mask236 which you can get here and Vix_Mask306 which you can get here)
- font of choice (I used unchanges thoughts$)

Let's start:

- Open a new canvas 550x550 px

- Copy and paste a paper of your choice and apply WSL_Mask236.

- Copy and paste the paper again and apply VIX_Mask306.
Duplicate this layer and mirror it horizontal.

- Copy and paste deco03, arrange it and add a dropshadow.

- Copy and paste the ribbon frame (frame09).

- With your magic wand click inside the frame and expand the selection about 5px.

- Copy and paste a new paper and move it under the frame layer.
Invert the selection and hit delete.

- Copy and paste the ice (ice01) and move it a bit to the top.
Hit delete again.

- Copy and paste the star bling (bling01) and move it over the ice.
Hit delete again.

- Selection none.

- Add a dropshadow to your ice, bling and frame layer.

- Highlight your frame-layer.

- Copy and paste your main tube and move it a bit to the right.
Erase these parts of it so that it looks if your tube will come outside of the frame.
(see mine for help ;) )
Add a dropshadow.

- Copy and paste the bells (bells03), resize it a bit and move it over the knot to the right side.
Dropshadow it.

- Copy and paste the lollipop (candy03), resize it and move it over the knot to the left side.
Rotate it a bit and add a dropshadow.

- Copy and paste the candy cane (candy01), resize it and move it over the lollipop.
Add a dropshadow.

- Set your foreground colour to white and your background colour to a maching colour.
Write your name on your tag and add a small dropshadow.

- At least you just need to add copyright and/or watermark and save as.

Ready! ♥

Glass Name Effect

2009-11-11T06:45:00.001-08:00

This tutorial was written by and copyrighted to Seven on 11th November 2009.

Many people already asked me how I often made my glass-effect.
And today I'm going to tell you how to do it.
I got this effect from my friend Caro!
Thank you sooo much! ♥

I'm sorry that most of the previews are in German but I'm only the German PSP 9 Version.
But I think you can compare and rethink!

For this tutorial you will need:

- a fat font of your choice (I used Coolsville)
- Eye Candy 3.01 - Glass

Let's start!

- Choose a foreground colour or pattern and a matching background colour.

- Choose your textool and search for a fat font.

- Adjust your font size to a size for your liking and the pixel to two or 3, what ever looks like the best.
I added you a picture of my settings for my sample.
(click image to enlarge)

- Change the vector layer to raster layer

- Selection - All - Free - Not free

- Reduce the selection about one mor pixel than your pixel of the font foreground-colour.
For example if you used 3 as a pixel size to your font you have to use a 4 for your reducing of the selection.

(You can maybe also click with your magic wand inside of the font)

- Use the inner bevel with the following settings
(click image to enlarge)

- Apply your Eye Candy 3.01 - Glass plugin with the following settings
(click image to enlarge)

- Selections - none

- Add a nice dropshadow to your writing :)

This was easy, or?

BCA

2009-10-24T08:18:00.000-07:00

This tutorial was written by and copyrighted to Seven on 24th October 2009.

For this tutorial you will need:

- Dee's part of the TNW BCA Collab-kit, which you can download here.
- A tube of your choice (I used a cute tube of Suzanne Woolcott which she sold at AMI. Now you can get her work at her own shop. )
- Mask of choice (I used flowerrectangle_MASK I don't know who created this so I can't supply it.)
- Font of your choice (I used Avalanche Script TT)

Let's start

- Open a new canvas 600 x 600 px.

- Copy and paste a paper of your choice and apply the mask.

- Copy and paste a frame (frame1) and resize it a bit.
Rotate it about 90 degrees to the right.

- With your magic-wand click inside of the frame and expand the selection about 5px.
Copy and paste a paper of your choice and move this layer under the frame layer.
Invert the selection and press delete.
Add a dropshadow to your frame.

- Copy and paste your tube and postion it over the frame.
Erase the part of the body of your tube which are looking over the bottom of the frame.
(see my tag for help)
Add a dropshadow to yoour tube.

- Copy and paste one of the bca-ribbons, resize and dropshadow it.
Move it to the right higher edge of the frame.

- Copy and paste one of the beaded strings, resize and dropshadow it.
Move it over the bca-ribbon.

- Copy and paste one of the butterflies. Resize and rotate it a bit.
Move it to the left side over the knot of the frame-ribbon and add a dropshadow.

- Copy and paste on of the tags (tag1 or tag2) and resize it.
Postion it in the middle of the lower part of your frame.
Add a small dropshadow.

- Copy and paste flower6, resize and dropshadow it.
Move it to the bottom of your frame on the left side.

- Copy and paste one of the bca-bears and resize it.
Move it to the bottom of your frame on the right side and add a dropshadow.

- Copy and paste one of the balloons.
Resize and rotate it.
Move this layer below your tube layer.
Dropshadow it.

- Write your name on the tag.

- Just add copyright information and/or watermark and save as.

Ready! ♥

So is Love

2009-10-23T05:20:00.001-07:00

This tutorial was written by and copyrighted to Seven in December 2008 and translated on 23th. July 2009

For this tutorial you will need:
- Scrapkit "A touch of elegance" by Yvette which you can download at Misfits Scraps
- Template "missy_tagtemplate41" which is downloadable on Missy's Blog
- 2 couple tubes of your choice. I used the fabulous art of Zindy S.D. Nielsen which I purchased at MPT. But now she's selling her stuff in her own shop.

Let's start

- Open the template, duplicate it with CTR+D and close the orignal. On your duplicated canvas delete the Copyright INfo

- On your "scallloped rectangle"-layer: Selections - select all - select free - selection not free and expand it about 1px. Copy and paste a paper from your kit into the selection, invert the selection and press the delete button. Selection - none. Add a dropshadow of your choice.

- Repeat the step above with all the other layers, but use other papers.

- On your "frame background1"-layer: Selections - select all - select free - selection not free. Copy and paste a tubeand resize it. Invert the selectiond an press delete button. Selection none.

- Repeat the step above with "Frame background2" and the 2nd tube.

- Copy and paste a butterfly or another element of your choice, resize and rotate it a bit. Move it to the right and add a dropshadow.

- Write your text and/or name andd give it a small dropshadow

- Add Copyright info and save as.

Garden Twins

2009-10-23T05:16:00.001-07:00

his tutorial was written by and copyrighted to Seven in February 2009 and translated on 23th. July 2009

For this tutorial you will need:

- "Rion Rocks" Scrapkit from Created by Jill
- (Twin-) Tube of your choice. I used the fabulos work of Rion Vernon alias Pin Up Toons which you can purchase at C.I.L.M
- Stock-photo of your choice. I got mine at stock.xchng

Let's start

- Open a new white canvas 550x550 px

- Copy and paste a frame. Resize and/or mirror it.

- WIth you magic-wand click in the middle of your frame and expand the selection about 5px.

- Copy and paste a paper of your choice, move it under the frame layer, invert the selection and press the delete button. Invert the selection again

- Copy and paste your photo, invert the selection and press delete button. Deselect. Lower the opacitiy about 44%

- Add a dropshadow to your frame

- Copy and paste a twine and move it to the left of your frame. Add a dropshadow

- Copy and paste flowers, resize, move them onto your twine and add a dropshadow.

- Copy and paste the beadstrings, resize, add a dropshadow and move them at the right side of your frame.

- Copy and paste your tube, move it onto the border below and add a dropshadow.

- Decorate your tag with elements of your choice.

- Write your name on the tag of the beadstring and add a small dropshadow.

- Add copyright infos and save as.

Peep Show Model

2009-10-23T05:08:00.001-07:00

This tutorial was written by and copyrighted to Seven in January 2009 and translated on 23th. July 2009

For this tutorial you will need:

-"Peep-Show" Scrapkit from TammyKat & Designs by Sarah purchaseable at Pimp My Tags w/ Scraps
- 2 Tubes of your choice. I used the amazing work of Keith Garveywhich you can puchase at MPT.
- Font of your choice.

Lets Start:

- Open a frame from your kit and duplicate it with CTRL+D. Close the original.

- With your Magic Wand click inside the frame and expand the selection about 4px

- Copy and paste a paper of your choice. Change the selection and pull the delete button. Selection none. Move the paper under the frame layer.

- Copy and paste the first tube, resize and put it in your frame. Change it to "hard-light" and add a dropshadow

- Flatten all visible layers and copy your frame

- Open a new white canvas 600x600 px and paste your copied frame in it.

- Copy and paste the other tube and position it left on your frame. Add a dropshadow.

- Copy and paste the round frame under the frame layer and add a dropshadow.

- Copy and paste the glitter and add it under the round-frame-layer

- Copy and paste a ticket and position it under the frame layer, rotate it a bit and put it on a nice place. Add a dropshadow.

- Decorate your work with other elements.

- Add your name and copyright infos and save as.

Just another Princess

2009-10-23T04:40:00.001-07:00

This tutorial was written by and copyrighted to Seven on 23rd October 2009

For this tutorial you will need:

- Sabs' Principessa -kit, which you can get here.
- A tube of your choice (I used a cute tube of Michelle Soneja which you can purchase at MPT)
- Mask of choice (I used WSL_Mask214 which you can get here)
- Font of your choice (I used Yummah Strawberriez)

Let's get ready! ♥

- Open a new canvas 600x600 px.

- Copy and paste a paper of your choice (Paper_05) and apply the mask on it.

- Copy and paste a flower frame of your choice (Frame_01, _02 or _03) and resize it abit.

- With your magic wand click inside of the frame and expand the selection about 3.
Copy and paste a glitter-paper of your choice and move it below the frame layer.
Selection - invert and press delete.
Selection none.
Add a dropshadow to your frame.

- Copy and paste your main tube.
Resize it and add a dropshadow.
Erase the parts from the body of your tube which were looking outside of the frame.

- Copy and paste a butterfly-wrap (wrap_04, _05 or _06) over your tube layer.
Dropshadow it.
Erase the parts of the endings of the wrap that it looks like that it woud be spaned over the tube.
(see my tag for help)

- Highlight the mask layer.
Copy and paste one of the blings (Bling_04, _05 or _06).
Resize them a bit and add a dropshadow.

- Highlight your tube layer again.
Copy and paste the silver-butterfly (butterfly_05) and resize it very small.
Move it over the hair of your tube and add a small dropshadow.

- Choose a mataching background colour and as foreground colour choose a glitter-paper.
Write your name on your tag and add a dropshadow.
(I also added a glass effect)

- At least add all Copyright-information and/or watermark and save as.

Ready ♥

Tiny's Halloween Party

2009-10-23T03:10:00.001-07:00

This tutorial was written by and copyrighted to Seven on 23rd October 2009

- Tiny D's Happy Spookoween -kit, which you can purchase here
- My Template #3 which you can download here
- Font of your choice (I used Gigi)

Let's start!

- Open my template.

- Copy a yellow or orange paper (pp25) from the kit and highlight the circle layer.
Selection - Selection all - Selection free - Selection not free.
Expand the selection about 1px.
Paste your paper into the selection.
Selection none.
Add a dropshadow to this layer.

- Repeat the above mentioned step with your stars (I used 3 different violet paper), the rectancle and the frame inlay (I used black ones).
Repeat this step also with the frame-layer (I used a green paper) but don't add a dropshadow.

- Highlight the frame layer and with your magic-wand click inside of the first rectangle of the frame and expand the selection about 1 px.
Resize and copy a monster or trickster from the kit.
Paste it to your canvas and move this layer under the frame layer.
Postion it that the head is in the frame.
Selection invert and hit delete.
(See my tag for help)

- Repeat this step above with the other parts of the frame.

- Add a dropshadow to your frame layer.

- Copy and paste two (or more) ghosts from the kit, resize and dropshadow them.
Move one to the left and the other one to the right side.

- Copy and paste a lollipop from the kit, resize it very small and dropshadow it.
Move it on the last frame to the right and rotate it a bit.
Duplicate this layer and mirror it.
Move it to the first frame to the left side.

- Highlight the background layer.
Copy and paste one of the glitter splashes and move it to the top.
Copy and paste the other glitter splash, mirror it and move it a bit to the ground.

- Choose your font and write your name.
Dropshadow it.

- At least you just have to add copyright-infos and/or watermark and save as.

Easy, or?

Kitsune

2009-10-14T15:53:00.000-07:00

This tutorial was written by and copyrighted to Seven on 15th October 2009

For this tutorial you will need:

- Sabs' Hope is forever -kit, which you can download here.
- 1 picture/painture of your choice (I used the fabulous work of Suzanne Woolcott. You can purchase her stuff here.)
- Font of your choice (I used A&S BlackSwan)

Let's get ready!

- Open a new canvasn 550 x 550 px.

- Copy and paste the wire (element_03). Resize it and rotate it a bit. Add a small dropshadow.

- Copy and paste frame_07 and resize it a bit. With your magic wand or selection tool select the inner side of the frame.

- Copy and paste your picture move this layer under the frame layer and postion it into the frame. Invert the selection and press delete.

- Add a dropshadow to your frame.

- Copy and paste one of the paper circles (element_20 or _21), resize it and move this layer under the frame and picture layer. Postion it to the left higher side and add a dropshadow.

- Copy and paste one of the mats (element_06 or _07), resize and rotate it a bit. Move this layer to the right lower side and dropshadow it.

- Highlight your frame layer.

- Copy and paste a ribbon (element_04 or _05), resize it and move to the ground of your frame. Add a dropshadow.

- Copy and paste the big flower (element_35), resize and dropshadow it. Postion it to the left side of your wire and frame.

- Copy and paste yoour tag (element_40), resize and rotate it a bit and move it to the right side over your ribbon. Don't forget the dropshadow.

- Write your name and/or text on it and give it a small dropshadow.

- Copy and paste the butterflies (element_33 and _34) resize and decorate your tag with them. Add a dropshadow.

- At least just add copyright and/or watermark and save as.

Ready ♥

Magic of Halloween

2009-10-10T04:37:00.001-07:00

This tutorial was written by and copyrighted to Seven on 10th October 2009.

For this tutorial you will need:

- My FTU-kit Ghost Train which you can download here
- A witch tube of your choice (I used one of the witch tubes which are in this kit)
- Mask of choice (I used WSL_Mask75 which you can get here)
- Xero - Radiance (optional)
- Halloween-Font of your choice (I usedMonsterChild)

Let's try it:

- Open a new canvas 600 x 500px

- Copy and paste a paper of your choice and apply the mask.

- Copy and paste the twirls, resize if necessary and add a small dropshadow.

- Copy and paste one of the ribbon, resize it and move it a bit to the middle of the canvas.
Dropshadow it.

- Copy and paste the book, resize it and add a dropshadow.

- Copy and paste spider01 and postion it over the star of your book.

- Copy and paste the stamp frame (frame16) and resize it.
Rotate it a bit. (see my tag above for help)

- With your magic click inside of the frame and expand the selection about 3px.

- Add a new raster layer and copy another paper of your choice.
Paste it into the selection.

- Move this layer under the frame layer.

- Copy and paste your tube. Postion it under the frame layer, so that the face is in the frame.
Invert the selection and press delete.
Selection none.

- If you want you can add the Cero-Radiance or an other nice effect on your tube.

- Add a small dropshadow to your frame.

- Copy and paste a candle of your choice, resize and dropshadow it.
Move it to the right side.

- Copy and paste a bow of your choice, resize it and postion it on the lower part of your candle.
Add a dropshadow.

- Choose your font and write your name in different but matching colours.
Add a small dropshadow.

- At least you just need to add copyright and/or watermark and save as.

Happy Halloween! ♥

Perfectly Pink

2009-10-05T05:34:00.000-07:00

This tutorial was written by and copyrighted to Seven on 05th October 2009.

For this tutorial you will need:

- Bea's PTU-kit Summer Love which you can get here
- A tube and a close up tube of your choice (I used a totally sexy tube of Keith Garvey which you can purchase at MPT)
- PlugIn Xero - Radiance

Let's start:

- Open a new canvas 600x600px.

- Copy and paste the wire, resize it and add a small dropshadow.

- Copy and paste a doodle (doddle3).

- Copy and paste the leaves (leaves2), resize a bit, add a dropshadwo and move it to the left.

- Copy and paste deco3 and add a dropshadow.

- Draw a feathered circle with your selection tool around the middle of the deco.

- Copy and paste a paper of your choice, move it below the deco.
Selection invert and hit delete 3 times.
Selection invert.

- Copy and paste your Close-Up tube and resize it.
Selection invert and hit delete again.
Selection none

- Apply the Xero Radiance plugin with the standardsettings and reduce the oppacity of the tube.

- Highlight the deco-layer.

- Copy and paste your tube, resize and dropshadow it.

- Choose a darker foreground and a lighter background colour and write your name.
Dropshadow it.

- Just add copyright info and/or watermark and save as.

Secrets

2009-10-01T12:33:00.001-07:00

This tutorial was written by and copyrighted to Seven on 01st October 2009.

For this tutorial you will need:

- Dee's Frosted Velvet-kit, which you can get here.
- Tina's Template which you can download here.
- A woman-tube of your choice (I used a totally awesome tube of Jose A Cano which you can purchase at MPT)
- Mask of choice (I used WSL_Mask220 which you can get here)
- Font of your choice

Let's start!

- Open the template and resize it about 80 %.

- Delete the copyrigh-layer (Raster1).

- Highlight the circle up right layer.
Selection - free - not free and expand it about 1px.

- Copy one of the satin-paper (paper9 or paper10) and paste them into the selection.
Selection - none and add a small dropshadow.
Repeat this step on the circle downl left layer.

- Repeat the above mentioned step with the both smaller circles and the hearts.
Use for the circles something grungy or swirly and for the hearts the other satin paper.

- Add also a dropshadow to the diamond circles.

- Highlight the rectangle-layer and copy an other paper of your choice.
Selection - free - not free and expand it about 1px.
Paste the paper into the selection.
Expand the selection again but this time about 3px and add a new raster-layer.
Fill them with a dark color of your choice.
Move this layer below the rectangle layer and merge both layer.
Add a dropshadow

- Copy and paste one of the glitterdoodle (1 or 2), resize and move it down to the right edge of the rectangle. Add a small dropshadow. Duplicate this layer and mirror it horizontal and vertical.
Move it to the left higher edge of the rectangle.

- Copy and paste the hangingvine, resize and add a dropshadow move it above the circle layers.
Duplicate and mirror it horizontal and vertical.

- Copy and paste a flower (flower1) and resize it. Add a dropshadow and decorate your hangingvines with it. (I duplicated and resized it again)

- Copy and paste a charm of your choice, resize and dropshadow it. Move this layer under the hearts layer. (see my tag above for help).

- Copy and paste your tube position it to the center of your canvas and add a dropshadow.

- Highlight the wordart-layer and color it into a matching color and add a small dropshadow.

- Highlight the background layer and copy and paste a paper of your choice.
Use the mask on it.

- Add your name to the tag and dropshadow it.

- At least you just need to add copyright and/or watermark info and save as.

Magic Melody

2009-09-26T14:07:00.001-07:00

This tutorial was written by and copyrighted to Seven on 26th September 2009.

For this tutorial you will need:

- Lullaby-kit from Misty Cato which you can get at Sweet Shoppe Designs
- A tube of your choice (I used a fabulous tube of Ismael Rac which you can purchase at AMI)
- Font of your choice (I used DJBMelisss, which you can also get at SSD)

I resized all my elements in tagger sized before I started.

Let's start:

- Open a new canvas 560x400px.

- Copy and paste a paper (solid4) of your choice.

- Copy and paste the musicnoteborder and move it a little bit to the top. Add a small dropshadow. Duplicate this layer and move it a little bit to the ground. (see my tag for help)

- With your selection/rectangle tool select a area between the two borders.

- Copy and paste a paper (pp4) and invert the selection. Press the delete. Selection - none.
Move this layer under the both border layers. Reduce the oppacity of the layer about 20 - 30%.

- Copy and paste a frame (frame3) and rotate it about 90 degrees. Move it a bit to the left side of your canvas.

- With your magic wand click inside of the frame and expand the selection about 4px.

- Copy and paste a paper and move it under the frame. Invert the selection and press delete button. Selection none.

- Copy and paste your tube and move it in the middle of the frame. Erase those parts of the tube which are looking over lower part of the frame. Add a dropshadow.

- Dropshadow your frame.

- Copy and paste one of the hanging notes and add a small dropshadow. Move it a little bit to the right.

- Repeat this step with the other two. But displace them a little bit more two the top or to the ground. (see my tag for help)

- Write your text and/or name with a font of your choice and add a small dropshadow.

- Add a 1 px border in a matching color.

- Add Copyright and/or watermark and save as.

Ready! ♥

Big Bad Wolf

2009-09-26T05:58:00.001-07:00

This tutorial was written by and copyrighted to Seven on 26th September 2009.

For this tutorial you will need:

- Tiny D's Big Bad Wolf -kit, which you can purchase here
- tube of your choice (I used the fabulous work of Suzanne Woolcott. You can purchase her stuff here.)
- Grass Tube of your choice (I made mine using the stamp-tool of psp)
Mask of choice (I used WSL_Mask220 which you can get here)
- Font of your choice (I used violation)

Let's start:

- Open a new canvas 650x500px. (you can resize it later)

- Copy and paste the fence and add a small dropshadow.

- Copy and paste your grass tube and move this layer under the fence layer.

- Copy and paste one of the houses, resize it and add a dropshadow. Move it below the grass layer and a little bit to the right.

- Copy and paste a wolf-tube, resize and dropshadow it. Position it on the right side of the house.

- Copy and paste your main tube, resize it and move it to the left side over the fence layer. Add a dropshadow.

- Copy and paste a bow and resize it very small. Add a small dropshadow and decorate your fence with it.

- Copy and paste the sun, resize and dropshadow it. Move this layer under the house layer and arrange it.

- Copy and paste a paper of your choice. Move this layer under all the layers and add your mask.

- With your selection tool, draw a selection about the parts of the paper which are looking under the frame. Press delete button.

- Write your name with a nive font, rotate it and add a dropshadow.

- Add all copyright-infos and/or watermark and save as.

Easy, eh?

In Loving Memory

2009-09-19T09:25:00.001-07:00

This tutorial was written by and copyrighted to Seven on 19th September 2009

This kit is dedicated to my unborn baby Ky, who went to heaven too soon.
My little Angel, Mommy and Daddy miss you!

For this tutorial you will need:

- Sabs' In Memory of -kit, which you can download here.
She dedicated this kit to me and my angel.
Dear Sabs, I can't thank you enough!
- 1 tube of your choice (I used the fabulous art of Zindy Nielsen. I used a free art and you can download it on her site.)
- Mask of your choice (I used WSL_Mask214 which you canget here)
- Font of your choice

Let's start:

- Open a new canvas 600x600 px.

- Copy and paste a paper of your choice and use the mask on it.

- Copy and paste one of the heart frames (element_47 or _48) and resize it if necessary.

- With your magic-wand click insie of the frame and expand the selection about 7px.

- Copy and paste a paper of your choice and move it below your frame-layer.

- Selection invert and press the delete button.

- Copy and paste one of the drop-elements (element_39 or _40), arrange it and press the delete button again. Selection - none.

- Highlight the heart frame. With you selection-tool select a rectangle above the flowers of the frame. Press delete.

- Add a dropshadow to your heartframe.

- Copy and paste one of the frames (element_27 or _28), resize and click inside the frame with your magic-wand.

- Expand the selection about 7px.

- Copy and paste another paper and move it below the frame-layer.

- Selection- invert and press the delete button. Selections none.

- Add a dropshadow to your frame.

- Copy and paste your tube. Resize it if necessary and erase part of it, so that it looks if it would came out of the frame. (eee my tage above for help). Add a small dropshadow.

- Copy and paste a candle, resize and dropshadow it and arrange it in the middle of your lower-part of the frame.

- Decorate your tags with flowers and butterflys.

- Write your text or your name on the tag and add a small dropshadow.

- At least add copyrigh-info and/or watermark and save as.

Thank you very much!

Heartless

2009-09-16T11:42:00.001-07:00

This tutorial was written by and copyrighted to Seven on 16th September 2009.

For this tutorial you will need:

- My Heartless-kit, which you can purchase here or here
- 2 tubes of your choice (I used the fabulous work of Suzanne Woolcott. You can purchase her stuff here.)
Mask of choice (I used WSL_Mask82 which you can get here)
- Xero - Radiance
- Font of your choice (I used MT Under Your Skin)

Let's start:

- Open a new canvas 600x600px

- Copy and paste a paper of your choice ans use the mask on it.

- Copy and paste frame22 or frame23 and resize it a bit.

- With your magic-wand click inside of the frame and expand the selection about px.

- Copy and paste a paper of your choice and move it under the frame layer.

- Selection invert and press delete button.

- Copy and paste your first tube, move it in the middle of the frame and press again the delete button.

- Selection - None

- Greyscale the tube.

- Apply Xero - Radiance with the standard settings.

- Reduce the opacity a bit.

- Merge the frame, tube and paper-layer together.

- Higlight the mask layer.

- Copy and paste a doodle (doodle04), resize if necessary and move it to the left side. Add a small dropshadow.

- Copy and paste a heart (heart05 - 08), resize and rotate it a bit and postion it to the left. Dropshadow it.

- Copy and paste the sparkle, resize it and move it to the lower part of the frame.

- Copy and paste the clock, resize and move it to the right side of your frame. Add a dropshadow.

- Highlight your frame layer.

- Copy and paste a butterfly, resize and rotate it a bit. Position it to the right upper part of the frame. Dropshadow it.

- Copy and paste the cloud, resize it and move it on the lower part of the frame.

- Copy and paste the key, resize and dropshadow it. Move it a bit to the left.

- Copy and paste your main tube. Postion it to the right side on your frame and add a dropshadow.

- Choose your font and write your name with a dark foreground and a light background color and apply a small dropshadow.

- Just add copyright-infos and/or watermark and save as.

U.S.A.

2009-09-15T14:20:00.001-07:00

This tutorial was written by and copyrighted to Seven on 15th September 2009.
It's dedicated to all my friends who live in the U.S.A.! ♥

For this tutorial you will need:

- My FTU-kit Americana which you can get here
- A tube of your choice (I used a totally sexy tube of Elias Chatzoudis which you can purchase at MPT)
- A firework photo of your choice. (I used one, which I made by myself)
- Mask of choice (I used WSL_Mask297 which you can get here)
- Eye Candy 3.01 - Glass
- Impact-Font of your choice (I used Deneane)
- hand-written font of your choice (i used violation)

Let's start:

- Open a new canvas 600x600px.

- Copy and paste a paper of your choice and use the mask on it.

- Copy and paste a stamp-frame (frame03 - frame07) and resize it a bit.
Rotate it about 90° to the right.

- Click inside the frame with your magic wand and expand the selection about 2px.

- Copy and paste your photo, resize and position it under the frame-layer.
Invert the selection and press delete key.

- Add a small dropshadow to your frame and merge it with the photo layer.

- Copy and paste a star and move it on the left upper edge.
Erase parts of it, so that it looks like, if the star would be over and under the frame.
(See my tag for help)
Add a dropshadow.

- Repeat this step with the left lower edge of the frame.

- Copy and paste your tube and position it. Dropshadow it.

- Choose a dark foregroundcolor and an other background color.

- Write your text (U.S.A) with the impact- font, but change at every letter the background-color.
(I used for the foregroundcolor a line width about 2,5px)

- Rotate it about 90° to the left.

- Selection - selection free - selection not free and reduce the selection about 3px.

- Use the innerface with the following settings:
(sorry I just have it in german, please click on the picture to enlarge)

- Now use your PlugIn Exe Candy 3.01 with the following settings:
(click on the preview to enlarge)

- Selections - none.

- Add a dropshadow.

- With your handwritten font write your name and add small dropshadow.

- At leaste just add copyright-infos and/or watermark and save as.

Break

2009-09-07T07:12:00.000-07:00

I need a break to sort some things etc.
Won't be around the next weeks!
Sorry for that!

Stargazer

2009-09-06T09:44:00.001-07:00

This tutorial was written by and copyrighted to Seven on 06th September 2009

For this tutorial you will need:

- Bea's Stargazer -kit which you can get here
- 1 lying-tube of your choice (I used the fabulous art of Zindy Nielsen, which you can buy at her own shop.)
- Mask of your choice (I used WSL_Mask297 which you canget here)
- Eye-Candy 4000 - radient Glow (optional)
- Font of your choice

Let's start:

- Open a new canvas 600x450px and will it with white.

- Copy and paste a paper of your choice and use the mask on it.

- Copy and paste the stamp-frame (frame1), resize and click with your magic-wand inside of it.

- Expand the selection about 3px

- Copy and paste a paper, resize a bit and move it under the frame layer.

- Invert the selection and press your delete button. Invert the selection again.

- Copy and paste your tube, move it under the frame, resize it, invert the selection and press delete. Selection none. Add a small dropshadow to your tube and your frame.

- Copy and paste a ribbon (ribbon1 or ribbon2) and move it under the paper layer. Dropshadow it.

- Copy and paste the element star5, resize it and add a dropshadow. Move it to the right edge above. Duplicate it and mirror it horizontal and vertical.

- Copy and paste the stitching (stitche), rotate it about 90 degrees and add a dropshadow. Arrange it on the "dotted line" of your frame.

- Copy and paste a paper-heart, resize and dropshadow it and move it on the lower side in the middle of the frame.

- Copy and paste the heart-element heart3, rasize and dropshadow it and move it a little bit over the paper heart.

- Copy and paste a butterfly (butterfly2), resize and mirror it. Add a dropshadow and postion it on the left edge of your frame.

- Write your name on your tagand add a gradient glow. Give it a small dropshadow.

- Add Copyright-Infos and/or watermark and save as.

Star Student

2009-09-03T14:31:00.000-07:00

This tutorial was written by and copyrighted to Seven on 03rd September 2009.

For this tutorial you will need:

- Tiny D's PTU-kit Returning 3 Skool which you can get here
- A tube of your choice (I used a cute tube of Barachan which you can purchase at MPT)
- Font of choice

Let's start:

- Open a new canvas 600x600px and fill it with white. (You can resize it later)

- Copy and paste the pencil (pencil) and move it a little bit above. Duplicate it mirror it vertical and horizontal. Copy and paste the other pencil (pencil2) position it on the left side over your other ones. Duplicate it and mirror it vertical and horizontal. Merge the 4 pencil-layers.
Now, we've got a frame.

- With your magic-wand click inside of the frame and expand the selection about 6px.

- Copy and paste a paper (pp9), move it below the frame, invert the selection and press delete.

- Copy and paste your tube and move it under the frame-layer. Press delete again. Selection - none. (I colored my tube black and white)

- Add a dropshadow to the frame layer

- Merge the frame, tube and paper layer.

- Copy and paste the notepaper (notebookppr), resize and move it under the frame them below the frame. Add a small dropshadow.

- Copy and paste the ruler, resize and rotate it a bit. Move it under the frame a little bit to the right upper edge. Add a dropshadow.

- Copy and paste the eraser, resize, rotate and dropshadow it. Move it over the papers.

- Copy and paste the compbook, rotate it, add a dropshadow and move it to the right side under all the other layers.

- Copy and paste the calculator, resize and rotate it and position it on the lower right edge above the frame. Dropshadow it.

- Copy and paste a bow, resize and rotate it and position it on the higher right edge. Dropshadow it.

- Copy and paste the label, resize and dropshadow it. Move it under the layer in the middle of lower pencil of the frame.

- Add your name to the label.

- Copy and paste the staple, resize it very small and fasten up your label.
After this duplicate this layer and fasten up your bow.

- Ad least add copyright-infos and/or watermark, resize the tag and save as.

Elve

2009-09-02T16:14:00.001-07:00

This tutorial was written by and copyrighted to Seven on 03rd of August 2009

For this tutorial you will need:

- Julie's "Angel and Fairies" kit which you can get here. (Hurry up! At the moment it's a freebie!)
- 1 Close-up Tubeof your choice (I used the fabulouse poser-art from Outlaws by Design)
- Font of your choice
- Mask of your choice (I used WSL_Mask259 which you can download here)

Let's start!

- Open a new white canvas 600x600px and fill it with white.

- Copy and paste a paper of your choice and use the mask on it.

- Copy and paste a fairy-dust.

- Copy and paste frame of your choice and resize it if necessary.

- With your magic wand click inside of the frame and also in the bigger spaces of the frame. Expand the selection about 5px.

- Copy and paste a paper, invert the selection and press delete button. Move this layer below the frame-layer.

- Add a dropshadow to your frame.

- Copy and paste sparkle and move it under the frame but above the paper layer.

- Copy and paste the ivy, resize if necessary and move it on the right side. Dropshadow it.

- Copy and paste your tube of your choice, resize and add dropshadow. Erase wit the eraser-tool part of the tube which are over the lower edge of your frame and erase some part of the frame which are "under" your tube, so that it looks like that your tube comes out of the frame. (see my tag above for help)

- Copy and paste a butterfly, resize and dropshadow it. Move it above the ivy.

- Copy and paste a heart, resize and dropshadow it and move it to the right side of your frame.

- Copy and paste one of the heart-tags and add a dropshadow. Move it to the lower edge on the right side of your frame.

- Write your name with a font of your choice and add a small dropshadow.

- At least add copyright-info and/or watermark and save as!

Easy, hu?

Boobies for Huy

2009-09-02T13:47:00.001-07:00

This tutorial was written by and copyrighted to Seven on 02nd September 2009.
It's dedicated to my friend Huy, whose favourite word is "boobies" ♥
Em yeû anh! :)

For this tutorial you will need:

- Bea's PTU-kit Ooh so blue! which you can get here
- A tube of your choice (I used a totally sexy tube of Elias Catzoudis which you can purchase at MPT)
- Mask of choice (I used WSL_Mask12 which you can get here)
- PlugIn EyeCandy 4000- Gradiant Glow (optional)

Let's start:

- Open a new canvas 600x600 px and fill it with white.

- Copy and paste a paper of your choice and use the mask on it.

- Copy and paste the natur3 element and add a small dropshadow.

- Copy and paste a frame (frame3) and resize it if necessary.

- With your magic-wand click inside of the frame and expand it about 5px.

- Copy and paste another paper, invert the selection and press delete.

- Move this layer below the frame layer.

- Add a dropshadow to the frame.

- Copy and paste your tube ans postion it on the left side of the frame. Erase the lower parts of the tube which are looking over the frame.

- Add a dropshadow to your tube.

- Copy and paste bead4, move it under the natur-layer to the left side and add a small dropshadow.

- Copy and paste the bling2, rotate it about 90° and move it on the right side of the frame. Add a small dropshadow.

- Copy and paste a flower and move it in the middle of the right side of the frame and bling. Add a dropshadow.

- Copy and paste the butterflies, resize them, add a dropshadow and decorate your tag with them.

- Copy and paste a bow of your choice, move it on the lower edge in the middle of your frame and dropshadow it.

- Copy and paste a button, resize it very small, dropshadow it and move it below the middle of your bow.

- Copy and paste two hearts, resize and dropshadow them, rotate them a bit and move them below the bow-layer. Position one onthe right and the other on on the left side.

- Write your name with a font of your choice, add a small gradient glow and a small dropshadow.

- Add least add copyright-infos and/or watermark and save as.

Ready ♥

XERACX

2009-09-01T13:31:00.001-07:00

This tutorial was written by and copyrighted to Seven on 01st September 2009

For this tutorial you will need:

- Bea's Freebie kit Thank You which you can get here
- A tube of your choice (I used a fabulous tube of Ismael Rac which you can purchase at AMI)
- Mask of choice (I used the eraser tool)
- PlugIn EyeCandy 4000- Gradiant Glow (optional)

Let's start:

- Open a new canvas 600x600px and fill it with white.

- Copy and paste a paper of your choice and use your mask on it or soften the edges with the eraser-tool.

- Copy and paste frame1 and resize if necessary.

- With your magic-wand click inside of the frame and expand the selection about 4px.

- Copy and paste another paper of choice (p1), resize it a bit and move this layer under the frame layer. Selection - Invert and press the delete-button.

- Copy and paste your tube and arrange it over the frame layer. (see my tag for help) Add a dropshadow

- Copy and paste deco5, move it under the frame and paper layer, rotate it a bit, move it to the left, resize and add a dropshadow.

- Copy and paste bead1 and bead2 and arrange them under the frame and paper layer at the right side. Add a dropshadow.

- Copy and paste string1 or string2, move it over the frame layer two the left. Resize and add a dropshadow.

- Copy and paste pendant1 and arrange it with the chain over the knot of the string and resize a bit. Erase a little bit of the chain and add a dropshadow.

- Write your name with a font of your choice and add a small gradient glow. Dropshadow it.

- At least add copyright-infos and/or watermark and save as.

Julie

2009-08-29T05:45:00.000-07:00

This tutorial was written by and copyrighted to Seven on 29th August 2009

For this tutorial you will need:

- Julie's Summer Bride -kit which you can get here
- 1 face tube of your choice (I used the fabulous art of Zindy Nielsen, which I bought at MPT. Now you can buy her beautiful art at her own shop.)
- Font of your choice

Let's start:

- Open a new canvas 550x550px. You can resize it later.

- Copy and paste one of the quadratic frames (frame-3 or frame-4).

- Click inside of the frame with your magic-wand and expand the selection about 2px.

- Add a new raster layer and copy and paste a paper of choice into the selection.

- Copy and paste your tube and resize it, if necessary. Invert the selection and press the delete button on your keyboard. Selection none.

- Move the frame above the other two layers and merge them visible.

- Copy and paste one of the circle frames (frame-5 or frame-6) and move it under the first frame-layer. Move it a little bit more to the right side (see my tag above for help).

- Copy and paste a cage, resize and move it on the top of your first frame into the right edge. Add a small dropshadow.

- Copy and paste a flower of your choice, resize and move it to the right bottom edge. Add a small dropshadow.

- Duplicate the flower-layer, resize it a little bit again and move this one to the left edge on the top.

- Choose a nice font and write your name on it. Add a small soft dropshadow.

- At least just add copyrightinfo and/or watermark

Ready ♥

Heaven's Angel

2009-08-23T04:14:00.001-07:00

This tutorial was written by and copyrighted to Seven on 23rd August 2009

For this tutorial you will need:

- Julie's Heaven Sent -kit which you can purchase here
- 1 Angel tube (I used the one which came with the kit)
- Font of your choice
- Mask of your choice (I used the eraser)

Let's start:

- Open a new canvas 550 x 550 px.

- Copy and paste a paper of your choice and use your mask on it or soften the edges with the eraser-tool.

- Copy and paste a glitter frame, resize and add a small dropshadow.

- Copy and paste the gate-left, resize and add a small dropshadow. Duplicate this layer and mirror it.

- Copy and paste a cherry blossom stem, resize and add a small dropshadow. Move it below the gate layer. Duplicate this layer and mirror it.

- Copy and paste the ivy, resize and dropshadow it. Move it over your gate. Duplicate and Mirror it.

- Copy and paste a flower, resize and dropshadow it. Decorate your ivy with it. Don't forget to duplicate and mirror ;)

- Copy and paste a cloud and resize it if necessary. Duplicate this layer and mirror it. Merge the two cloud layers together and add a very small and light dropshadow.

- Copy and paste your tube, resize and add a dropshadow.

- At least write your name and add a small dropshadow. Add Copyright infos and save as .png

Easy, hu?

Vampire Romance

2009-08-22T06:27:00.000-07:00

This tutorial was written by and copyrighted to Seven on 22nd August 2009

For this tutorial you will need:

- My "Twilight" kit which you can purchase here or here
- 2 Vampire Tubes of your choice (I used the fabulouse poser-art from Outlaws by Design)
- Font of your choice
- Xero - Radiance

Let's start!

- Open a new canvas 550x550px

- Copy and paste a frame (frame19 or frame20) and resize.

- With your magic-wand click inside the circles and expand about 5 px.

- Copy and paste a paper of your choice and move this layer below the frame layer

- Selections invert and press delete button. Selection none.

- With your magic wand click inside a circle of your frame and copy and paste one of your tubes. Resize if necessary. Selections invert, press delete button and selection none. Use the Xero Radiance plugin and add a small dropshadow. Move this layer under the frame but over the paper layer.

- Repeat the above mentioned step with your other tube in the other circle.

- Add a dropshadow on your frame layer.

- Copy and paste a doodle, resize and rotate it about 90°

- Duplicate it and mirror it vertical.

- Merge the two doodle layer, duplicate it and mirror it horizontal.

- Add a small dropshadow on the doodle layer.

- Copy and paste the candles, resize and add a dropshadow. Move it between the two circles of the frame.

- Copy and paste the rose, resize and add a dropshadow. Move it down to the candles.

- Copy and paste a flower, resize and add a dropshadow. Move it between the two circles and on the border above.

- Copy and paste a diamaont heart, resize and add a dropshadow. Move it above the flower layer.

- Copy and paste the moon, resize and move it under the paper layer. Move the moon, that a part of it looks out of the right border from the frame (see my preview for help)

- Copy and paste a raven, resize, add a dropshadow and move it over the moon that it looks like that the raven is sitting on the frame.

- Write your name above the rose and add a dropshadow.

- Add Copyrightinfos and/or your watermark and save as.

Elephants for Chantal

2009-08-10T11:51:00.000-07:00

This tutorial was written by and copyrighted to Seven on 10th August 2009.
It's dedicated to the cute daughter of my lovely online-friend Sabs!

For this tutorial you will need:

- Sabs' Pink Illusion kit (Once it was a PTU-kit but know she removed it and started a new thing ;) She allowed me to put the pieces I used in the supplies. TYVM! ♥)
- 2 (elephant-) tubes of your choice (I used the fabulous work of Suzanne Woolcott. You can purchase her stuff here.)
- mask of choice
- maybe font of choice

You can download my material here:
Material

Let's start:

- Open a canvas 600x600px and fill it with white or another background color of your choice.
We can resize it later.

- Copy and paste the paer and use your mask.

- Copy and paste the notepaper, resize and add a dropshadow.

- Copy and paste the raindrops and resize them.
Arrange them on your notepaper. (I erased some part of it. See my tag above for help)

- Copy and paste the satinwrap, resize and arrange it so that it looks like that it would wrap the notepaper. Add a dropshadow.

- Copy and paste the spiralheart, resize and move it under the wrap layer. Add a dropshadow.

- Copy and paste your tubes, resize and add a dropshadove. Arrange them.
(I moved one under and one above the wrap)

- Copy and paste the pen, resize, dropshadow and rotate it a bit. Move it ober the wrap to the left.

- Copy and paste the butterfly, resize and add a dropshadow. Move it to the top.

- Choose a colur of your choice and write your name or text and add a small dropshadow.

- Add copyright-infos if necessary and/or watermark and save as.

Toxic Star

2009-08-01T04:58:00.001-07:00

This tutorial was written by and copyrighted to Seven on 01st August 2009

For this tutorial you will need:

- Kristin's Freebie kit Toxic Rock which you can get here
- A Close Up tube of your choice (I used a fabulous tube of Ismael Rac which he sold at MPT. Now you can get his work at AMI)
- PlugIn Xero - Radiance

Let's start:

- Open a canvas 600x600px

- Copy and paste the star frame (Kristin-TR-Frame2)

- Click inside the star with your magic wand and expand the selection about 2px

- Add a new raster-layer and copy and paste a paper into the selection

- Add another new raster-layer copy and paste your tube into the selection

- Selection none.

- Use the Plugin Xero Radiance with the standard settings and reduce the opacity of the layer a bit

- Add a dropshadow to your frame layer and merge all visible

- Copy and paste glitter under your star

- Copy and paste the wordart (Kristin-TR-Wordart1), enlarge it about 110px and move it a bit to the left

- Copy a noe-doodle and paste it above the star-layer, add a small dropshadow

- Copy and paste the ticket, resize and rotate it a bit, add a dropshadow and move it to the right edge of the star

- Copy and paste the candybar, resize and rotate it a bit, add a dropshadow and move it to the right edge of the star

- Copy and paste an iPod, resize it, add a dropshadow and move it to the right edge of the star a little bit above the candy bar (see my tag for help)

- Write your name with a font of your choice (I used BankGothic) and add a dropshadow

- Add copyright information and save as .png

Holiday Greetings

2009-07-21T08:07:00.001-07:00

This tutorial was written by and copyrighted to Seven on 21st. June 2009

For this tutorial you will need:

- My "Splish, Splash, Fun!" -kit which you can purchase here or here

Let's start:

- Open a new canvas 700x300 px.

- Copy and paste stampframe08

- With your magic wand click inside the larger rectangle and expand the selection about 5px

- Add a new raster-layer

- Copy and paste a paper in the selection and deselect.

- Throw the paper-layer under the frame layer-

- Copy and paste elements of your choice and decorate your "frame-window". Add a dropshadow.

- Copy and paste 2 elements on the big-white place and reduce the opacity at 50% or less.

- Write your Text/Name over it and add a dropshadow.

- Decorate your frame with towel, umbrella, ice, ball, bow, buoy or what ever you like. Don't forget the dropshadow!

- Add Copyright information and/or watersign and save as .png

Emerald Butterfly

2009-06-24T14:19:00.000-07:00

This tutorial was written by and copyrighted to Seven on 24th June 2009

For this tutorial you will need:

- KatNKDA's Freebie kit Emerald Dreams which you can get here
- A tube and a Close Up tube of your choice (I used a fabulous tube of Ismael Rac which he sold at MPT. Now you can get his work at AMI)
- Mask of your choice. I used WSL_Mask259
- PlugIn Xero - Radiance

Let's start:

- Open a canvas 600x600px.

- Copy and paste a paper of your choice and use the mask.

- Copy and paste your frame (element28) of choice and resize.

- Click with your magic wand in it and expand it to 2 px.

- Copy and paste a paper of your choice, selection invert and press the delete button on your keyboard.

- Copy and paste your Close-Up Tube and place it into the frame. Press the delete button again and select none.

- Duplicate the Tube-Layer.

- On the layer below put it on Luminace and add a gaussian blur with 3.00.

- Use the Xero Radiance PlugIn on your duplicated tube-layer.

- Merge the frame, paper and the both tube layers visible.

- Add a dropshadow of your choice.

- Copy, paste, resize and arrange elements and add a dropshadow.

- Copy and paste your tube, resize it and use the Radiance PlugIn again. Add a dropshadow.

- Add your name and Copyright-Info and merge all visible. Save it!

World of a Princess

2009-05-15T11:15:00.001-07:00

This tutorial was written by and copyrighted to Seven on 12th May 2009

For this tutorial you will need:

- My "Girl Dreams" -kit which you can purchase here, here, here or here
- mask of choice - WSL_Mask79 which you can download here

Let's start:

- open a new white canvas 700x500px, you can resize it later

- add a paper of your choice and use the mask on it (merge group layers)

- copy and paste a frame of your choice, resize and add a dropshadow

- use your magic-wand click inside of the frame and expand the selection to 10px

- copy and paste a paper and pull it under the frame-layer (selection - none)

- copy and paste the rainbow, resize it and add a dropshadow
copy and paste the castle, resize it and add a dropshadow, put it over the the frame layer and erase the parts which are over the downside part of the frame
copy and paste the unicorn, resize it and add a dropshadow, put it over the the frame layer and erase the parts which are over the downside part of the frame
copy and paste the crown, rotate it a bit, resize it and add a dropshadow
copy and paste a princess, resize it and add a dropshadow
(see my picture for help)

- decorate your image with elements and add a dropshadow

- at least add your name and if necessary copyright info, resize it and save as .jpg

Storybook

2009-05-03T12:51:00.000-07:00

This tutorial was written by and copyrighted to Seven on 03rd May 2009

For this tutorial you will need:
- a tube of your choice - I am using the beautiful artwork of Rachel Zimra
- a scrapkit of choice - I am using my PTU Annegret scrapkit, which you can get here.
- mask of choice - zuzzanna-mask60 which you can download here

Let's start:

- open a new white canvas 550x500 px

- copy and paste a notebook, resize and roate it of your liking and add a dropshadow

- copy and paste a frame, resize

- click inside the frame with your magic-wand and expand the selection to 5px

- copy and paste a paper of choice, put it under you frame layer, invert the selection and press the delete button on your keyboard, deselect.

- add a dropshadow to your frame

- copy and paste your tube, dropshadow and move it, that it looks that it would be going out of the frame

- decorate your tag with other elements (don't forget to dropshadow them)

- add a new raster-layer over the background-layer and fill it with a color or a paper of choice

- use the zuzzanna-mask60

- add your name and copyright info and flatten all together

READY ♥
I hope you liked it :)

Hello and Welcome

2009-05-03T12:22:00.000-07:00

Yaaaaaay!
I am back in writing tutorials.
But at this time I'm gonna to write them in English only.
Nearly everyone understands it and there are a lot of great online-translaters too.
In the next time I will redone and translate my older ones.
Have fun!

~*~ Seven's Tutorials ~*~